Install Debian + VDR to make a HTPC with Nexus-S card
Hej.
Har försökt göra en liten howto på min htpc.
Denna är inte helt komplett men kanske nån kan hjälpa till å få den slutförd.
Kan finnas fel i den ??
Å stavfel kan förekomma men ni behöver inte göra enhel tråd med dem, bara ni fattar vad som menas. :P
Howto install debian +vdr +plugins for Nexus-s card +remote.
----------------------------------------------------------------------------------------
Debian install + compile kernel + add some apps.
----------------------------------------------------------------------------------------
Install Debian on pc.
Download debian from www.debian.org
Update to debian unstable (sarge)
Kod:
apt-setup (and change to sarge!)
or
joe /etc/apt/sources.list (change all stable to unstable)
and
apt-get update
apt-get dist-upgrade
add fellowing packets: (whit apt-get install <package>)
Kod:
joe
ssh
wget
tar ?
bzip2 ?
...
Download newest 2.6 kernel from kernel.org to /usr/src (must be newer than 2.6.11)
Kod:
cd /usr/src
wget <file name>
Install make + libncurses5-dev + hotplug + ??? (whit apt-get install <package>)
Compile kernel:
Kod:
tar -jxvf linux-<version>.tar.bz2
ln -s linux-<version> linux
cd linux
make menuconfig
----------------------------------------------------------------------------------
< add what you need for you're pc > + the fellowing:
[*] Prompt for development and/or incomplete code/drivers ¦ ¦
¦ ¦[*] Select only drivers expected to compile cleanly ¦ ¦
¦ ¦ [ ] Select only drivers that don't need compile-time external firmware
General Setup[*] Support for hot-pluggable devices
Loadable module support[*] Module unloading
Processor type
Pick you processor type
Bus options[*] PCI Support[*] PCI Device name database
Device drivers
Generic Driver Options[*] Hot plug firmware loading support
--- Mouse interface ¦ ¦
¦ ¦[*] Provide legacy /dev/psaux device ¦ ¦
¦ ¦ (1024) Horizontal screen resolution ¦ ¦
¦ ¦ (768) Vertical screen resolution ¦ ¦
¦ ¦ < > Joystick interface ¦ ¦
¦ ¦ < > Touchscreen interface ¦ ¦
¦ ¦ <*> Event interface ¦ ¦
¦ ¦ < > Event debugging
--- I2C support ¦ ¦
¦ ¦ <*> I2C device interface ¦ ¦
¦ ¦ I2C Algorithms ---> ¦ ¦
¦ ¦ I2C Hardware Bus support ---> ¦ ¦
¦ ¦ Hardware Sensors Chip support ---> ¦ ¦
¦ ¦ Other I2C Chip support ---> ¦ ¦
¦ ¦ [ ] I2C Core debugging messages ¦ ¦
¦ ¦ [ ] I2C Algorithm debugging messages ¦ ¦
¦ ¦ [ ] I2C Bus debugging messages ¦ ¦
¦ ¦ [ ] I2C Chip debugging messages
<*> I2C bit-banging interfaces ¦ ¦
¦ ¦ < > I2C PCF 8584 interfaces
[*] DVB For Linux ¦ ¦
¦ ¦ <*> DVB Core Support ¦ ¦
¦ ¦ --- Misc. Frontend Modules ¦ ¦
¦ ¦ --- DVB-S (satellite) frontends ¦ ¦
¦ ¦ <*> ST STV0299 based ¦ ¦
¦ ¦ < > Connexant CX24110 based ¦ ¦
¦ ¦ < > Grundig 29504-491 based ¦ ¦
¦ ¦ < > Zarlink MT312 based ¦ ¦
¦ ¦ < > VLSI VES1893 or VES1993 based
--- Supported SAA7146 based PCI Adapters ¦ ¦
¦ ¦ <*> AV7110 cards ¦ ¦
¦ ¦[*] Compile AV7110 firmware into the driver ¦ ¦
¦ ¦ (/usr/lib/hotplug/firmware/dvb-ttpci-01.fw) Full pathname of av7110 firmware file ¦ ¦
¦ ¦[*] AV7110 OSD support ¦ ¦
¦ ¦ < > Budget cards ¦ ¦
¦ ¦ < > Budget cards with onboard CI connector ¦ ¦
¦ ¦ < > Budget cards with analog video inputs
[*] /proc file system support ¦ ¦
¦ ¦ [ ] /dev file system support (OBSOLETE) ¦ ¦
¦ ¦ [ ] /dev/pts Extended Attributes
-----------------------------------------------------------------------------------
done?? = exit and save.... (maby something i miss??? then just add and recompile)
------------------------------------------------------------------------------------
Kod:
make
make modules_install
cp arch/i386/boot/bzImage /boot/kernel-<version>
joe /etc/lilo.conf
--------------------------
default=Linux
image=/boot/kernel-<version>
label=Linux
read-only
image=/vmlinuz
label=Safe
read-only
# restricted
# alias=1
---------------------------
save...
---------------------------
lilo (no errors)
reboot
----------------------------------------------------------
Now u shall have a working new kernel!!!
Not? Boot to Safe and add the missing + recompile kernel.
----------------------------------------------------------
Kod:
<login>
cd /usr/src
wget http://207.44.152.197/dvb-ttpci-01.fw.bz2 <-- patched for use whit vdr + sc later!!
tar -jxvf dvb-ttpci-01.fw.bz2
cp dvb-ttpci-01.fw /lib/firmware (creat map if not there! or missing some in kernel/hotplug!!)
modprobe dvb-ttpci (no errors i hope!)
lsmod
---------------------------------------------------
shall show something like this: (dvb-ttpci = card working now!)
Module Size Used by
ipv6 207552 10
lirc_dev 11748 0
parport_pc 21956 0
parport 19648 1 parport_pc
dvb_ttpci 91432 22
dvb_core 72232 1 dvb_ttpci
l64781 6788 1 dvb_ttpci
saa7146_vv 45440 2 dvb_ttpci
video_buf 16644 1 saa7146_vv
saa7146 14600 2 dvb_ttpci,saa7146_vv
v4l1_compat 13956 1 saa7146_vv
v4l2_common 4864 1 saa7146_vv
videodev 7040 2 saa7146_vv
ves1820 5380 1 dvb_ttpci
stv0299 10504 1 dvb_ttpci
tda8083 5636 1 dvb_ttpci
stv0297 8320 1 dvb_ttpci
sp8870 6924 1 dvb_ttpci
ves1x93 6276 1 dvb_ttpci
ttpci_eeprom 2432 1 dvb_ttpci
af_packet 12552 2
-------------------------------------------------
joe /etc/modules (add dvb-ttpci to a new line for working card when startup!)
reboot and lsmod to see if ok!!
SYSTEM = OK!
------------------------------------------------------------------------------------
VDR Install:
------------------------------------------------------------------------------------
Download dvb driver
Download vdr
Kod:
wget ftp://ftp.cadsoft.de/vdr/Developer/vdr-<version>.tar.bz2 (1.3.x)
tar -jxvf vdr-<version>.tar.bz2
cd vdr-<version>
joe Makefile
edit too:
DVBDIR = ../DVB
LSIDIR = ./libsi
MANDIR = /usr/share/man
BINDIR = /usr/local/bin
LIBS = -ljpeg -lpthread -ldl
INCLUDES = /usr/include
apt-get install gcc
apt-get install libjpeg62-dev (i hope it was this one!)
make
make plugins <options>
mkdir /etc/vdr
mkdir /usr/lib/vdr
mkdir /video
cp vdr /usr/bin
cp *.conf /etc/vdr
cp PLUGINS/lib/* /usr/lib/vdr
Make channels.conf before start
Kod:
cd /usr/src/DVB/apps/scan (if you dont have this search the net!!)
joe dvb-s/<Satelit you want to have or creat new>
add to this file: freq pol sr fec
ex: S 12054000 V 27500000 3/4
Kod:
./scan -o vdr -e 3 dvb-s/<satelit> > channels.conf
cp channels.conf /etc/vdr/
Start VDR
Kod:
vdr -c/etc/vdr -L/usr/lib/vdr -w900 -P<plugin name if some>
----------------------------------------------------------------------
Now is you're vdr working! If you have edited *.conf in /etc/vdr!!
----------------------------------------------------------------------
Want to see in pc monitor?
Kod:
apt-get install fbtv
fbtv -q -t10 (error? some missing in kernel (framebuffer/event interface)
Start vdr whit:
Kod:
vdr -c/etc/vdr -L/usr/lib/vdr -t/dev/tty10 -w900 -P<plugin name if some>
--------------------------
Add plugins:
--------------------------
For plugin errors try fellowing:
Kod:
make clean
make plugins-clean
<start over>
Remote (for nexus remote)
Kod:
cd /usr/src/vdr-<version>/PLUGINS/src
wget http://escape-edv.de/endriss/vdr/vdr-remote-<version>.tgz
tar -zxvf vdr-remote-<version>.tgz
ln -s vdr-remote-<version> remote
cd /usr/src/vdr-<version>
make clean
make
make plugins
cp PLUGINS/lib/libvdr-remote.so.<vdr-version> /usr/lib/vdr/
rm /etc/vdr/remote.conf
< start vdr and add -Premote to startup and hold down a button until vdr find the remote >
Kvar:
Göra ett startup script som startar vdr + fbtv när man sätter igång den å ett shutdown script till vdr power off.
Fattas hur man sätter in:
SC (softcam, cardsharing)
ttxtsubs (subtitles som används för viasat + cd)
Bra sida om vdr och hur man sätter in plugins + vart man hittar dem.
http://www.linuxtv.org/vdrwiki/
Är det nåt ni vet är fel i denna så säg till.
Jag vet inget nu men man kan inte se allt. :wink:
Tack för mig.
/Mami
