Kortet pajat ellet? *LÖST*
Kör NewCS på linux.
Detta har fungerat flawless bra länge.
Plötsligt häromdagen avkodas inte kanaler på dreamboxen längre.
Log från när NewCS startas
Citat:
This is NewCS 1.60 - the New CardServer by the Butter-team..
Compiled on May 19 2008 at 21:03:14
Reading Config file from newcs-1.60/configs/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 17:08:01 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 17:08:01 ] [ Config ] Pincode for device 0 (Phoenix Interface CH): 0000
[ 17:08:01 ] [ Config ] /dev/ttyUSB1 ECM priority: round
[ 17:08:01 ] [ EMM Cache ] Initialising dynamic Cache
[ 17:08:01 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 9412
[ 17:08:01 ] [ Loader ] Starting Telnet on port xxxx
[ 17:08:01 ] [ Loader ] Reader type 2 on node /dev/ttyUSB1
[ 17:08:01 ] [ Phoenix ] Opening device /dev/ttyUSB1
[ 17:08:01 ] [ Phoenix ] Setting Parity to: EVEN
[ 17:08:01 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB1
[ 17:08:01 ] [ Phoenix ] Setting Baud to standard 9600
[ 17:08:01 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB1
[ 17:08:03 ] [ ATR ] T=0 1etu=104.17us Guardtime:12etu WWT:9600etu
[ 17:08:03 ] [ ATR ] Historical bytes: 0 B 0 0
[ 17:08:03 ] [ Loader ] Init Conax card
[ 17:08:03 ] [ Phoenix ] Setting Parity to: EVEN
[ 17:08:03 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB1
[ 17:08:03 ] [ Phoenix ] Setting Baud to standard 9600
[ 17:08:03 ] [ Keyman ] Adding key nnnnnnnn type 0 on Provider 000000 for caid 0B00 ID=0
[ 17:08:03 ] [ Keyman ] Adding key nnnnnn type 1 on Provider 000000 for caid 0B00 ID=0
[ 17:08:03 ] [ Loader ] Card 0B00 on port /dev/ttyUSB1 ready
[ 17:08:03 ] [ Loader ] Starting Newcamd Server on port xxxx
[ 17:08:03 ] [ Newcamd ] Newcamd thread Server started on port xxxx
[ 17:08:03 ] [ NewCS ] Ready to GO! :)
Och på boxen får jag följande
Citat:
[newcamd] Card data from 192.168.0.10:xxxx (2ms):
EMM enabled, Card serial: nnnnnnnn
Userid 1 caid B00 providers 1
Idents: 000000
ids: nnnnnn
got 8 cmd 9F
got 74 cmd 9F
[mg0] namespace 0 t-id 30 on-id A027
[mg0] descramble on 1, source 0
[mg0] service 47A index 0 pmt pid 110 (2)
ECM: CaID: 0x0B00 -> CaPID: 0x037A ProvID: 000000
ECM: CaID: 0x0500 -> CaPID: 0x030A ProvID: 008800
[mg0] No conax key(s) found for id 0 keynr 20
[mg0] -> ECM to 192.168.0.10:xxxx
[mg0] newcamd route 192.168.0.10:xxxx cant decode (2ms)
[mg0] network can't decode
[mg0] pid 0x037A failed to decode.
[mg0] No viaccess key(s) found for id 8800 keynr 00
[mg0] network can't decode
[mg0] pid 0x030A failed to decode.
Nån som har den blekaste?
Fattar inte varför boxen blandar in viacess. ComHem är ju conax.
