New cs 1.67 med adteknik mp3.6 usb?
Hej, jag behöver lite hjälp med att få igång news cs 1.67 på senaste unbutu och ad tekniks gula mp 3.6 läsare. Det går ej sätta den i phoenix mode, vad gör jag för galet?? Tacksam om någon kan hjälpa mig! Kan kasnke någon posta en config som fungerar med denna läsare:
http://www.adteknik.se/swedish/mp36usb.htm
Ibland står det med att firmware version is unkown när den ska sätta den i phoenix läge!
Min new cs.xml fil:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
<globals>
<listening-ip>192.168.1.2</listening-ip>
<certificate>/var/tuxbox/config/newcs.pem</certificate>
</globals>
<readers name="Standard Phoenix on PC">
<device>
<name>Phoenix on Com1</name>
<type>mp35</type>
<mhz>368</mhz>
<node>/dev/ttyUSB2</node>
<infinity_number>0</infinity_number>
<slot>0</slot>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camke-ydata>00000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000</ipk>
<ucpk>000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15050</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<id>0000</id><id>0001</id><id>0002</id>
</allow>
<deny>
<id>0000</id><id>0001</id><id>0002</id>
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>Yes</enabled>
<port>10001</port>
<allow>00
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>krimson</name>
<password>krimson</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>spam</level>
<type>init</type>
<output>console,tcp,file</output>
<console_options>normal,init</console_options>
<logfile>/etc/newcs.log</logfile>
<file_options>spam,all</file_options>
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options>normal,init</udp_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
</newCSconfig>
så här ser det ut när jag startar:
anders@anders-D2804-A1:~$ newcs.i686 -c/etc/newcs/newcs.xml
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:12:45
Reading Config file from /etc/newcs.xml
NewCS is trying to bind to IP: 192.168.1.2
TCP-log password is enabled, set to: NewCSpwd
level: spam
type: init
output: console,tcp,file
logger config: level 3 type 3 output 13
Console log options: level 1 type 3
log file: /etc/newcs.log
logger: cant open file /etc/newcs.log, file log disabled
TCP log options: level 1 type 3
[ 09:27:23 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 09:27:23 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 09:27:23 ] [ Config ] Value in <ipk> for device 0 (Phoenix on Com1) is INVALID, skipping...
[ 09:27:23 ] [ Config ] Value in <ucpk> for device 0 (Phoenix on Com1) is INVALID, skipping...
[ 09:27:23 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 09:27:23 ] [ Config ] /dev/ttyUSB2 ECM priority: round
[ 09:27:23 ] [ httpd ] httpd-user: krimson, password: krimson, accesslevel: admin
[ 09:27:23 ] [ EMM Cache ] Initialising dynamic Cache
[ 09:27:23 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 14556
[ 09:27:23 ] [ Loader ] Starting Telnet on port 1001
Can't create server: Address already in use
[ 09:27:23 ] bind: error! 13: Permission denied
[ 09:27:23 ] [ Loader ] Reader type 3 on node /dev/ttyUSB2
[ 09:27:23 ] [ Phoenix ] Opening device /dev/ttyUSB2
[ 09:27:23 ] [ MP35 ] Trying to set Mp3.5 to Phoenix mode on node /dev/ttyUSB2
[ 09:27:30 ] [ MP35 ] Looks like something went wrong, no answer or wrong answer from the mp3.5 - reseting..
[ 09:27:31 ] [ Loader ] Reset failed ...
[ 09:27:31 ] [ Loader ] Starting Newcamd Server on port 15050
[ 09:27:31 ] [ Loader ] Starting Radegast Server on port 10001
[ 09:27:31 ] [ NewCS ] Ready to GO! :)
[ 09:27:31 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 09:27:31 ] bind: error! 99: Cannot assign requested address
[ 09:27:31 ] bind: error! 98: Address already in use
mvh ad
