DK Boxer & alexcs

hello guys

I have been fighting with this new alexcs2 and my boxer card on internal network.
SETUP:
DB500 with newcamd and Boxer card.
TV with Boxer CAM (MPEG4) and alexcs

cardserv.conf file :
DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER_NAME = cardserver
DEBUG_PORT = 14000
ENTITLEMENT_PORT = 14001
ADMIN_PORT = 14002
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
USER = local local lan 127.0.0.1 12000 au
USER = spider spider lan 127.0.0.1 15003
DEBUG_INIT = no
DEBUG_NET = no
DEBUG_ECM = no
DEBUG_EMM = no
SERIAL_PORT = 0
TCP_PORT = 10000
SERIAL_PORT = 1
TCP_PORT = 10001
BOXID = 0000000000

In alex webpage status says connected. It is set to Viaccess.
On tv it says "You don't have right to decode HE-AAC audio" and there is no picture.

Boxer CAM works with boxer card in.
I have trie to change BOXID to the 6 digit number on CAM, but it is the same.

What am I missing?
Maybe ATR...?

First add a user for the Alex client (should always be set to au).
USER = alex1 alex_pw au

Also add the following line to allow for longer login time:
CLIENT_CONNECT_TIMEOUT = 50

Assuming you have the Boxer card in serial port 0 you will have Alex connecting to port 10000. BOXID is not needed.

So in Alex you set the server IP and port (10000), use "alex1" as Login and "alex_pw" as Password.
Also check the Extend SC Timeout checkbox.
No change of ATR needed.

Restart Alex and TV.

If still not working post logs from server.

Thank you for your help, but it did no change for me. Its the same text on the TV.
Where can I look for the logs on the dreambox? What directory, I cant find any thing...

Also check that the interface card is competely inserted in the card slot. In some cases you might have to cut the corners of the board a little bit.

Hmm... If i take it out, the tv says "no access". And if i insert the interface again, the tv says again "you dont have right to decode audio".
So i do think it is insertet correct.
Also through the TV's CI-menu i can access the menu on the alex2 interface.
I tried to telnet into the debug port 14000 but nothing happens....

Any other ideas?