Får inte igång NewCS1.67 på Dreambox
Hej
Jag försöker att få igång newcs på min Dreambox.
Började med att installera newcs 1.67 samt Mgcamd 1.35a men får det inte att lira.
Har testat med massa olika konfigurationer efter att läst en del nya och gamla inlägg här utan resultat.
Min newcs.xml
Kod:
<newCSconfig>
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<readers name="Standard Phoenix on PC">
<device>
<name>Phoenix</name>
<type>sci</type>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>inverse</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>16050</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>10001</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>internal</level>
<type>all</type>
<output>file</output>
<logfile>/tmp/newcs-log.txt</logfile>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<spider>no</spider>
<readers>
<allow>Phoenix</allow>
</readers>
</user>
</newcamdserver>
</newCSconfig>
Min newcamd.list
Kod:
CWS_KEEPALIVE = 300
CWS = localhost 16050 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Jag har även lagt in CWS-raden i newcamd.conf
Newcs loggen:
Kod:
[ 01:44:47 ] [ Box detect ] Box type 7 (Dream Multimedia (MIPS) HD Box)
[ 01:44:47 ] [ Config ] Option <blockc0> for device 0 (Phoenix) not present, defaulting to NO
[ 01:44:47 ] [ Config ] Option <mhz> for device 0 (Phoenix) not present, defaulting to 357
[ 01:44:47 ] [ Config ] Option <protectedsid> for device 0 (Phoenix) not present, no PIN Code will be sent
[ 01:44:47 ] [ Config ] /dev/sci0 ECM priority: round
[ 01:44:47 ] [ Newcamd ] Server name : newcs
[ 01:44:47 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 01:44:47 ] [ Config ] Option <hostname> or <port> not present for User: dummy, DISABLING reverse login
[ 01:44:47 ] [ Config ] Option <sidoverride> not present for User: dummy, defaulting to OFF
[ 01:44:47 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, level: 0
[ 01:44:47 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 01:44:47 ] [ EMM Cache ] Initialising dynamic Cache
[ 01:44:47 ] [ ECM Cache ] Initialising dynamic Cache
[ 01:44:47 ] Calibrating delay loops
[ 01:44:47 ] usleep(5) takes: 0 s 25 us
[ 01:44:47 ] usleep(10) takes: 0 s 16 us
[ 01:44:47 ] usleep(100) takes: 0 s 107 us
[ 01:44:47 ] usleep(500) takes: 0 s 541 us
[ 01:44:47 ] Allocation memory for 200 regular users
[ 01:44:47 ] [ Loader ] Starting Telnet on port 0
[ 01:44:47 ] [ SockSrv ] Server thread started
[ 01:44:47 ] [ Loader ] Started HTTP-server on port: 8080
[ 01:44:47 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 01:44:47 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 01:44:47 ] [ CardMan ] Reseting reader parameters
[ 01:44:47 ] [ Sci ] Opening device /dev/sci0
[ 01:44:47 ] [ Sci ] Detected DM800 SCI
[ 01:44:47 ] [ Sci ] resetting card now
[ 01:44:47 ] [ Sci ] Reset
[ 01:44:50 ] [ Sci ] NO ATR Received
[ 01:44:50 ] [ Sci ] Card reset
[ 01:44:50 ] [ Sci ] Timeout is 3743808us
[ 01:44:54 ] [ Sci ] Read Timeout (0 of 1)
[ 01:44:54 ] Sci_read:
[ 01:44:54 ] [ Sci ] No ATR received. resetting again
[ 01:44:54 ] [ Sci ] Reset
[ 01:44:57 ] [ Sci ] NO ATR Received
[ 01:44:57 ] [ Sci ] Timeout is 3743808us
[ 01:45:02 ] [ Sci ] Read Timeout (0 of 1)
[ 01:45:02 ] Sci_read:
[ 01:45:02 ] [ Sci ] NO Card ATR data detected
[ 01:45:02 ] [ Loader ] Reset failed ...
[ 01:45:02 ] [ Loader ] Starting Newcamd Server on port 16050
[ 01:45:02 ] [ NewCS ] Ready to GO! :)
[ 01:45:02 ] [ Card queue /dev/sci0 ] Starting...
[ 01:45:02 ] [ Newcamd ] Newcamd thread Server started on port 16050
[ 01:45:02 ] [ Newcamd ] new connection from 127.0.0.1 on socket 9
[ 01:45:02 ] [ Newcamd:16050 ] Connection from 127.0.0.1
[ 01:45:02 ] [ Newcamd:16050 ] User dummy logged in, client: Mgcamd
[ 01:45:02 ] [ Newcamd:16050 ] Command E3 from dummy len 3
[ 01:45:02 ] [ Newcamd:16050 ] Sending Card Information to dummy:
[ 01:45:02 ] [ Newcamd:16050 ] Command D6 from dummy len 3
[ 01:45:02 ] [ Newcamd:16050 ] get version from dummy
Kan nån vara snäll och hjälpa mig lite på traven.
Jag är rätt Noob på det här.
Tack på förhand!! :)
