Argolis SmartReader V1.7 med NWCS
Hej
Försöker få igång en ny Smartreader från Argolis med firmware V1.7 tillsammans med NWCS 1.65 windows version.
Kör Windows 8.1 och har en Phoenix läsare från AD teknik som fungerar utmärkt med NWCS 1.65 men får inte SmartReadern att fungera.
Har provat med olika hastigheter 600;hz 400 MHz men det ger ingen skillnad. Så snart klienten ansluter så ansluter så går server ett "[ 13:17:18 ] [ Loader ] Reinit card with caid 0B00"
Så här se konfigfilen ut:
newCSconfig>
<readers name="Phoenix">
<device>
<name>canalp</name>
<type>phoenix</type>
<mhz>400</mhz>
<node>COM4</node>
<baud>9600</baud>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<Seca-PPV>no</Seca-PPV>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15050</newcamd_port>
<priority>round</priority>
</device>
</readers>
Loggen ser ut så här:
This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:54:08
Reading Config file from newcs.xml
TCP-log password is enabled, set to:
TCP-log set to simple mode
level: verbose
type: init
output: console,tcp
logger config: level 2 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 13:17:02 ] [ Box detect ] Windows Vista Build 9200
[ 13:17:02 ] [ Config ] Option <blockc0> for device 0 (canalp) not present, defaulting to NO
[ 13:17:02 ] [ Config ] COM4 ECM priority: round
[ 13:17:02 ] [ httpd ] httpd-user: xxx, password: xxxl, accesslevel: admin
[ 13:17:02 ] [ EMM Cache ] Initialising dynamic Cache
[ 13:17:02 ] [ ECM Cache ] Initialising dynamic Cache
[ 13:17:02 ] [ Loader ] Starting Telnet on port 1001
[ 13:17:02 ] [ Loader ] Started HTTP-server on port: 8080
[ 13:17:02 ] [ Loader ] Reader type 2 on node COM4
[ 13:17:02 ] [ Phoenix ] Opening device COM4
[ 13:17:03 ] [ Phoenix ] Setting parity to EVEN on node COM4
[ 13:17:03 ] [ Phoenix ] Setting 2 Stop bits on node COM4
[ 13:17:03 ] [ Phoenix ] Setting baud to 10472
[ 13:17:04 ] [ ATR ] T=0 1etu=93.00us Guardtime:12etu WWT:9600etu
[ 13:17:04 ] [ ATR ] Historical bytes: 0 B 0 0
[ 13:17:04 ] [ Loader ] Init Conax card
[ 13:17:04 ] [ Phoenix ] Setting parity to EVEN on node COM4
[ 13:17:04 ] [ Phoenix ] Setting 2 Stop bits on node COM4
[ 13:17:04 ] [ Phoenix ] Setting baud to 10472
[ 13:17:05 ] [ KeymaN ] Adding key xxxx type 0 on Provider 000000 for caid 0B00 ID=0
[ 13:17:05 ] [ KeymaN ] Adding key xxxxx type 1 on Provider 000000 for caid 0B00 ID=0
[ 13:17:05 ] [ Loader ] Card 0B00 on port COM4 ready
[ 13:17:05 ] [ Loader ] Starting Newcamd Server on port 15050
[ 13:17:05 ] [ Newcamd ] Newcamd thread Server started on port 15050
newcamd: main loop
[ 13:17:07 ] [ Newcamd:15050 ] User user3 logged in, client: Mgcamd
[ 13:17:08 ] [ Loader ] Reinit card with caid 0B00
[ 13:17:12 ] [ Loader ] Reader type 2 on node COM4
[ 13:17:12 ] [ Phoenix ] Opening device COM4
[ 13:17:12 ] [ Phoenix ] Setting parity to EVEN on node COM4
[ 13:17:12 ] [ Phoenix ] Setting 2 Stop bits on node COM4
[ 13:17:12 ] [ Phoenix ] Setting baud to 10472
[ 13:17:14 ] [ ATR ] T=0 1etu=93.00us Guardtime:12etu WWT:9600etu
[ 13:17:14 ] [ ATR ] Historical bytes: 0 B 0 0
[ 13:17:14 ] [ Loader ] Init Conax card
[ 13:17:14 ] [ Phoenix ] Setting parity to EVEN on node COM4
[ 13:17:14 ] [ Phoenix ] Setting 2 Stop bits on node COM4
[ 13:17:14 ] [ Phoenix ] Setting baud to 10472
[ 13:17:14 ] [ KeymaN ] Adding key xxxxx type 0 on Provider 000000 for caid 0B00 ID=0
[ 13:17:14 ] [ KeymaN ] Adding key xxxxxx type 1 on Provider 000000 for caid 0B00 ID=0
[ 13:17:14 ] [ Loader ] Card 0B00 on port COM4 ready
[ 13:17:18 ] [ Loader ] Reinit card with caid 0B00
[ 13:17:22 ] [ Loader ] Reader type 2 on node COM4
[ 13:17:22 ] [ Phoenix ] Opening device COM4
[ 13:17:22 ] [ Phoenix ] Setting parity to EVEN on node COM4
[ 13:17:22 ] [ Phoenix ] Setting 2 Stop bits on node COM4
[ 13:17:22 ] [ Phoenix ] Setting baud to 10472
Snälla, någon som har något tips??
