Intern kortläsare alternativt Smartreader till Vu+Solo2 och Oscam

Har försökt få interna kortläsaren att läsa från Viasatkort, men tji.

Får följande i loggen

(reader) upper_card_Viasat [internal] card detected
(reader) upper_card_Viasat [internal] ATR: 00 00
(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention
(reader) upper_card_Viasat [internal] Error activating card.
(reader) upper_card_Viasat [internal] ATR: 00 00
(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention
(reader) upper_card_Viasat [internal] Error activating card.
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
(reader) upper_card_Viasat [internal] ATR: 00 00
(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention
r (reader) upper_card_Viasat [internal] Error activating card.
(reader) upper_card_Viasat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
(reader) upper_card_Viasat [internal] card initializing error


Jag har testat att ta bort mHz och cardmhz i Oscam.server, men samma fel. Har ett 090F-kort så inget Boxid ska behövas.

Har en smartreader som viasatkortet fungerar i men den sitter idag i en DB800HD.
Om jag vill flytta över den och testa om Vu+-boxen kan läsa, Vad behöver jag göra då?

Antar att protocol = smartreader är rätt.
Men vad ska man ange på device?

Har testat med device = /dev/ttyUSB0 men får felmeddelandet att det borde varit device = bus:dev

Kan någon ge mig en knuff i rätt färdriktning

Prova protocol = smargo

Testade det men fick felmeddelande att den inte hittade en fil

Måste jag ladda ner någon drivrutin för USB-läsaren??

Jag minns att jag var tvungen att göra det på DB800 !

Protocol = internal
Device = /dev/sci0



Skickat från min GT-I9506 via Tapatalk

Ja det har jag inställt för interna kortläsaren, men inget liv alls

Har fått lite liv i interna läsaren, men fortfarande ingen bild

Oscam.server

[reader]
label = upper_card_Viasat
enable = 0
protocol = internal
device = /dev/sci1
caid = 090F
detect = cd
mhz = 375
cardmhz = -1
group = 1
emmcache = 1,3,15,0
blockemm-unknown = 1
dropbadcws = 1
ratelimitecm = 4
ratelimittime = 9000
ecmunique = 1
srvidholdtime = 2000
cooldown = 30,600


Log from Oscam

(main) System name = Linux2
(main) Host name = vusolo2
(main) Release = 3.13.5
(main) Version = #1 SMP Wed Feb 3 22:21:13 CET 2016
(main) Machine = mips
(main) Stb model = dm8000
(main) Stb vumodel = vusolo2
(main) Stb boxtype = vusolo2
(main) creating pidfile /tmp/oscam.pid with pid 6342 couldn't open statistics file: /var/log/oscam/oscamuser.log
(config) userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
(main) signal handling initialized
(config) 10 provid's loaded
(config) 164 service-id's loaded in 1 ms
(net) monitor: initialized (fd=4, port=988)
(net) newcamd: initialized (fd=5, port=10000)
(net) -> CAID: 0B00 PROVID: 000000, FFFFFF

(reader) upper_card_Viasat [internal] creating thread for device /dev/sci1
(reader) lower_card_CanalDigital [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
(reader) lower_card_CanalDigital [internal] Reader sci internal, detected box type: vusolo2
(stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
(main) waiting for local card init

(reader) upper_card_Viasat [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)

(reader) upper_card_Viasat [internal] Reader sci internal, detected box type: vusolo2
(reader) upper_card_Viasat [internal] card detected
(reader) upper_card_Viasat [internal] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
(reader) upper_card_Viasat [internal] Init card protocol T0, FI=1, F=372, D=1, N=3

(reader) upper_card_Viasat [internal] Calculated work ETU is 82.67 us reader mhz = 450

(reader) upper_card_Viasat [internal] Buffers readed 0 bytes total time_us 4796699

(reader) upper_card_Viasat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
(reader) upper_card_Viasat [internal] Card type: VTTV
(reader) upper_card_Viasat [internal] Rom version: 10L9
(reader) upper_card_Viasat [internal] Credit available on card: 0 euro
(reader) upper_card_Viasat [internal] classD0 ins36: returned unknown type=0xF9 - parsing may fail
(reader) upper_card_Viasat [internal] classD0 ins36: returned unknown type=0x03 - parsing may fail
(reader) upper_card_Viasat [internal] FuseByte: 25
(reader) upper_card_Viasat [internal] Region Code: SWE00000
(reader) upper_card_Viasat [internal] Country Code: SWE

Testa att skriva in readtiers = 2 under [reader]-delen för ditt 090F-kort.

Edit: t.ex. så kan du testa med denna oscam.server:

Kod:

---

[reader]
label            = upper_card_Viasat
enable          = 1
protocol        = internal
device          = /dev/sci1
group            = 1
emmcache        = 1,3,15,0
caid            = 090F
readtiers        = 2
blockemm-unknown = 1

---