-
Sent? Ja! Tittar på hockey samtidigt ;-)
OK, nu känns det som jag har testat allt, men samma sak händer hela tiden.
Bilden funkar i 2-10 sekunder, sedan fryser den och kommer inte tillbaka om man inte byter softcam.
Ligger filerna på rätt plats.
Newcs ligger i: /etc/tuxbox/config
Newcamd.list ligger i: /usr/keys
Är mg_cfg korrekt?
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }
-
kopiera dessa och klistra in i mg_cfg och testa
M: { 00 }
C: { 01 }
A: { 00 }
U: { 01 }
T: { 00 }
G: { 01 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 00 }
O: { 02 } root dreambox
S: { 08 } 80
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 02 }
D: { 00 }
B: { 06 }
F: { 00 }
-
På vilken burk fryser bilden?
Hur ser newcamd.list ut på den burken?
Ta bort raden
<rate>2</rate>
ur newcs.xml.
-
Bilden fryser på Ultimo. Jag försöker främst att få den att fungera. Om den fungerar hoppas jag att det ska vara lättare att få solon att funka.
<rate>2</rate> har jag redan tagit bort efter att läst annat inlägg från dig atomized.
-
Tänk om folk som vill ha hjälp kunde svara på alla frågor man ställer när man försöker hjälpa till... ;)
Du svarade inte på hur newcamd.list ser ut på Ultimon just nu...?
Sedan kan du prova att ställa ned hastigheten på läsarna genom att ändra raden
<mhz>600</mhz>
till
<mhz>368</mhz>.
Hur nytt är ditt CD-kort? Det finns rapporter om att de nyaste CD-korten bara fungerar i oscam. NewCS är mycket gammal och har inte utvecklats på många år.
Dina filer ser OK ut.
-
Newcamd.list på servern:
CWS_KEEPALIVE = 300
CWS_MULTIPLE = 127.0.0.1 10000:10001 ultimo ultimo 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
Kortet är sedan 2010 tror jag.
Har ändrat till 368 nu, men det fungerar ändå inte. Får försöka med Oscam då kanske.
-
Ändrade till Oscam och allt fungerar aldeles utmärkt.
Om man hade gjort det från början hade man inte behövt sitta en hel dag med detta.
Tack alla för hjälpen.
-
Kul att du fick igång det. Det bästa sättet att lära sig är att sitta och hålla på själv tills det funkar. ;)