Hejsan!
Nedanstående har ingen kunnat hjälpa mig med hittills. Jag sliter mitt hår i frustration. Har postat samma fråga på ett annat forum så det är skrivet på engelska.
I'm trying very hard to solve the problem so I reinstalled Gemini 3.10 for DM500. This time i did not choose the MAXVAR version. It's still not working though.
I've made a new mgcamd debug session and I present the results below. This time I have disabled the network mode do minimize the messages from mgcamd.
(The real URL is replaced by http://****** above)Kod:~ > /var/bin/mgcamd_1.14 AES URL: http://******* AES URL: http://******* AES URL: http://******* tuxbox mgcamd by mixvt Aug 19 2006 19:55:29 (v1.14) We called as: /var/bin/mgcamd_1.14 [mg] Net:0:3:0:10s Show ecm:1, emm:1 Up:5 Au:3 Dir:0 Osd:no:3 Cache:7 Log:2:1724 [mg] Ecm cache time: 15 Box type: dreambox ~ > Keys readed ignore prov 0100:000076 ignore prov 0100:000070 ignore prov 0100:000084 ignore prov 0100:000085 ignore prov 0100:000089 ignore prov 0500:020000 ignore prov 0500:000000 ignore prov 0500:008300 ignore prov 0500:008100 ignore prov 0500:008110 ignore prov 0500:022600 ignore prov 0500:008000 ignore prov 0500:00C400 ignore caid 0960 ignore caid 0918 ignore caid 1810 ignore caid 4AD4 ignore caid 0D05 ignore prov 0600:000026 ignore prov 0600:000032 ignore prov 0600:00003A ignore prov 0600:00003C ignore prov 0600:0000AB ignore prov 0600:0000AC ignore prov 0600:000092 ignore prov 0600:0000AD ignore prov 0600:000037 priority prov 0500:015000 priority prov 0100:000080 priority caid 0602 priority caid 1722 [mgcamd] aes update over http started got 468 cmd 9F [mg0] namespace 820000 t-id 2BC0 on-id B0 [mg0] descramble on 1, source 0 [mg0] service 4B9 index 0 pmt pid 384 (1) ECM: CaID: 0x0500 -> CaPID: 0x03C0 ProvID: 007C00 ECM: CaID: 0x0500 -> CaPID: 0x03C1 ProvID: 022610 ECM: CaID: 0x0500 -> CaPID: 0x03CB ProvID: 020010 [mg0] No viaccess key(s) found for id 7C00 keynr 0b [mg0] Viaccess: no good AES key found [mg0] pid 0x03C0 failed to decode. [mg0] No viaccess key(s) found for id 22610 keynr 08 [mg0] pid 0x03C1 failed to decode. [mg0] No viaccess key(s) found for id 20010 keynr 08 [mg0] pid 0x03CB failed to decode. [mgcam] emm thread started EMM: CaID: 0x0500 -> CaPID: 0x0032 ProvID: 000000 EMM: CaID: 0x0500 -> CaPID: 0x0034 ProvID: 000000 EMM: CaID: 0x0500 -> CaPID: 0x0035 ProvID: 000000 EMM: CaID: 0x0500 -> CaPID: 0x0037 ProvID: 000000 [mgcam] emm thread stopped [mgcamd] aes wakeup [mgcamd] going to load key from http://****** [mgcamd] going to load key from http://****** [mgcamd] going to load key from http://****** [mgcamd] aes wakeup
Here is my my mg_cfg file:
Here are my files in /var/keys:Kod:# EMM messages # 00 don't show any EMM's (default) # 01 show only valid EMM's # 02 show valid and bad EMM's with complete data display M: { 01 } # ECM messages # 00 don't show any ECM's # 01 show only valid ECM's (default) # 02 show valid and bad ECM's with complete data display C: { 01 } # AU # 01 enable AU # 02 AU Auto # 03 network cards update only A: { 03 } # key update (sum 01 or 02 with 04) # 01 update only new keys, default setting # 02 update all keys (used for valid PMK checking) # 04 replace (not add) http-aes keys U: { 05 } # config files folder (softcam, autoroll, ignore/priority) # 00 files in /var/keys # 01 files in /tmp T: { 00 } # network mode, use summ for several clients # 00 no network (default) # 01 newcamd netclient # 02 radegast netclient # 04 camd3 netclient G: { 01 } # network retry, use summ for several options # 00 disable # 01 retry every new ecm # 02 try to connect to offline shares every Q: seconds # 04 try to detect and fast reconnect to lost (and not used atm) server N: { 03 } # network ecm timeout in seconds K: { 10 } # newcamd dead routes connect retry, sec Q: { 20 } # network shares priority # 00 newcamd, radegast, camd3 (default) # 01 camd3, radegast, newcamd # 02 newcamd, camd3, radegast P: { 00 } # on screen display type # 00 No OSD (default) # 01 neutrino # 02 enigma # 03 relook O: { 00 } # on screen display Options # 03 (default) # 01 show emu ecm # 02 show network shares messages # 04 show decoding failed / fta # 08 show emm keys update S: { 03 } # Log options # 00 Off # 01 Network # 02 console # 03 both L: { 02 } 172.16.1.1 28007 # cache ecm pids and data used to open channels, # store pids in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list # use summ # 00 Off (default) # 01 Ecm pids cache # 02 Ecm data cache # 04 Emm cache for network cards H: { 07 } # reread files, summ of options # 00 No (default) # 01 config on zap (including priority and ignore, but not replace/cache) # 02 SoftCam.Key on zap # 04 SoftCam.Key on file change R: { 04 } # debug, use summ # 00 off (default) # 01 debug ecm # 02 debug emm # 04 debug network ecm # 08 debug network emm # 16 debug network login D: { 00 } # box type # 00 autodetect, change only if you think wrong type detected. # 01 dbox2 # 02 dreambox # 03 triple-dragon # 04 relook # 05 openbox B: { 00 } # keep ecm cache, seconds E: { 15 } # urls for aes keys update, any number or urls allowed, # url data must contain key in format 0500:007C00:0000000000:00:key1:keyl W: { http://***** } W: { http://***** } W: { http://***** }
I don't think I can come up with a solution by my self. If You think you know how to solve this problem, please help me.Kod:~ > cd /var/keys /var/keys > ls -la drwxr-xr-x 3 1000 1000 0 Sep 1 11:54 . drwxr-xr-x 18 root root 0 Jan 1 1970 .. -rwxr-xr-x 1 root root 20157 Sep 1 11:54 AutoRoll.Key -rwxr-xr-x 1 root root 1150 Sep 1 11:54 Conax.Key -rwxr-xr-x 1 root root 21005 Sep 1 11:43 SoftCam.Key -rwxr-xr-x 1 1000 1000 489 Feb 19 2006 ignore.list -rwxr-xr-x 1 1000 1000 3110 Sep 1 12:09 mg_cfg drwxr-xr-x 2 root root 0 Aug 22 18:49 nagra_roms -rwxr-xr-x 1 1000 1000 92 Feb 19 2006 priority.list -rwxr-xr-x 1 1000 1000 1199 Feb 19 2006 replace.list
Also, if you have Gemini 3.10 installed on DM500 and this is working for you, please confirm.
Svara med citat
