gemini cs

**lethl** · 2008-02-26, 14:53

Hejsan har börjat om från början flashat om med gemini 4.2.
Mgcamd1.29 +Newcs1.50 Även följt guiden kortdelings ABC http://www.dreamboxx.nu/download.php?view.1033 norsk guide.
Känns som jag lagt flera 100 tim men ser fortarande inte ljuset i tunneln.Har läst varenda guide jag hittat.Får inte klienten att funka.
Server 192.168.0.20 klient 192.168.0.30.

Server 192.168.0.20

var/keys/mg.cfg:

Kod:

# EMM messages 
# 00 don't show any EMMs (default) 
# 01 show only valid EMMs 
# 02 show valid and bad EMMs with complete data display 
M: { 01 } 

# ECM messages 
# 00 don't show anything about ecm 
# 01 normal mode, show pids processed, decoded ecm and cw 
# 02 verbose mode, show valid and bad ECMs with data 
C: { 01 } 

# AU 
# 00 disable, no emm pids processed 
# 01 enable, emm pids always processed for soft-au and shared cards 
# 02 auto, emm started only if channel cant be decoded 
# 03 process emm pids for network cards update only 
A: { 01 } 

# key update (sum 01 or 02 with 04) 
# 01 update only new keys, default setting 
# 02 update all keys (used for valid PMK checking) 
# 04 enable TPS au 
U: { 01 } 

# config files folder (softcam, autoroll, ignore/priority) 
# 00 files in /var/keys 
# 01 files in /tmp 
T: { 00 } 

# network mode, use summ for several clients 
# 00 no network (default) 
# 01 newcamd netclient 
# 02 radegast netclient 
# 04 camd3 netclient 
# 08 gbox netclient 
G: { 01 } 

# network retry, use summ for several options 
# 00 disable 
# 01 retry every new ecm 
# 02 try to connect to offline shares every Q: seconds 
# 04 try to detect and fast reconnect to lost (and not used atm) server 
# + XX messages number and YY seconds to reconnect 
# mg will reconnect to server, if no answer to last XX ecm/keepalive or 
# if no answer for last ecm or keepalive sent for YY seconds 
# set to 0 to disable 
N: { 07 } 5 30 

# network ecm timeout in seconds 
K: { 05 } 

# newcamd dead routes connect retry, sec 
Q: { 60 } 

# network shares priority 
# 00 gbox, newcamd, radegast, camd3 (default) 
# 01 camd3, radegast, newcamd, gbox 
# 02 newcamd, camd3, gbox, radegast 
P: { 00 } 

# on screen display type 
# 00 No OSD (default) 
# 01 neutrino 
# 02 enigma 
# 03 relook 
# + user password for http auth 
O: { 00 } username password 

# on screen display Options, summ of: 
# 01 show emu ecm 
# 02 show network shares messages 
# 04 show decoding failed / fta 
# 08 show emm keys update 
# + web port to use for osd 
S: { 03 } 80 

# Log option, summ of: 
# 00 off 
# 01 network udp log 
# 02 log to console 
# 04 file, appended ! delete it by yourself, before it eat all your hdd 
# + IP udp-port log-file-name 
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log 

# keep ecm cache, seconds 
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory, 
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings. 
E: { 15 } 

# cache option, summ of: 
# 00 Off (default) 
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list 
# 02 Ecm data cache, remember CW for (E time 
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart 
H: { 07 } 

# reread files, summ of: 
# 00 No (default) 
# 01 reread config file on channel change (including priority and ignore, but not replace/cache) 
# 02 reread SoftCam.Key on channel change 
# 04 reread SoftCam.Key if file changed 
R: { 00 } 

# debug, summ of 
# 00 off (default) 
# 01 debug ecm 
# 02 debug emm 
# 04 debug network ecm 
# 08 debug network emm 
# 16 debug network login 
# 32 show mem/cpu stats every 1 min 
# 64 add timestamp to log messages 
D: { 00 } 

# box type 
# 00 autodetect, change only if you think wrong type detected. 
# 01 dbox2 
# 02 dreambox 
# 03 triple-dragon 
# 04 relook 
# 05 openbox 
B: { 00 }

var/keys/newcamd.list:

Kod:

CWS = 127.0.0.1 10000 local local 55 11 55 04 05 06 07 12 14 14 15 16 19 20 lan cardserv 
CWS = 127.0.0.1 10001 local local 55 11 55 04 05 06 07 12 14 14 15 16 19 20 lan cardserv

var/keys/newcamd-client.txt:

Kod:

[127.0.0.1] 
port = 10000 
key = 55 11 55 04 05 06 07 12 14 14 15 16 19 20 
username = local 
password = local 
[127.0.0.1] 
port = 10001 
key = 55 11 55 04 05 06 07 12 14 14 15 16 19 20 
username = local 
password = local

var/tuxbox/config/newcs.xml:

Kod:

xml version="1.0"?> 
<newCSconfig> 
<readers> 
<device> 
<name>lower</name> 
<type>Sci</type> 
<node>/dev/sci0</node> 
<export>yes</export> 
<enabled>yes</enabled> 
<blocksa>No</blocksa> 
<blockua>No</blockua> 
<blockga>No</blockga> 
<PTShandshake>no</PTShandshake> 
<crypto>no</crypto> 
<carddetect>yes</carddetect> 
<newcamd_port>10000</newcamd_port> 
<priority>hard</priority> 
<autosid>yes</autosid> 
<Seca>no</Seca> 
<sid> 
<allow> 
<id></id> 
</allow> 
<deny> 
<id></id> 
</deny> 
</sid> 
</device> 
<device> 
<name>upper</name> 
<type>Sci</type> 
<node>/dev/sci1</node> 
<export>yes</export> 
<enabled>yes</enabled> 
<blocksa>No</blocksa> 
<blockua>No</blockua> 
<blockga>No</blockga> 
<PTShandshake>no</PTShandshake> 
<crypto>no</crypto> 
<carddetect>yes</carddetect> 
<newcamd_port>10001</newcamd_port> 
<priority>hard</priority> 
<autosid>yes</autosid> 
<Seca>no</Seca> 
<sid> 
<allow> 
<id></id> 
</allow> 
<deny> 
<id></id> 
</deny> 
</sid> 
</device> 
</readers> 
<radegastserver> 
<enabled>no</enabled> 
<port>10011</port> 
<allow>ALL</allow> 
</radegastserver> 
<cache> 
<emm>10</emm> 
<ecm>10</ecm> 
</cache> 
<debug> 
<level>normal</level> 
<type>all</type> 
<output>file,all</output> 
<logfile>/tmp/newcs_log.txt</logfile> 
<console_options></console_options> 
<file_options>init,ecm,emm</file_options> 
<udp_host>192.168.1.20</udp_host> 
<udp_port>1000</udp_port> 
<udp_options></udp_options> 
<tcp_port>3001</tcp_port> 
<tcp_options></tcp_options> 
</debug> 
<newcamdserver> 
<enabled>yes</enabled> 
<name>cardserv</name> 
<deskey>55 11 55 04 05 06 07 12 14 14 15 16 19 20</deskey> 
<userfile>/tmp/users.txt</userfile> 
<user> 
<name>local</name> 
<password>local</password> 
<au>on</au> 
</user> 
<user> 
<name>user1</name> 
<password>1234</password> 
<au>on</au> 
</user> 
<user> 
<name>user2</name> 
<password>1234</password> 
<au>on</au> 
</user> </newcamdserver> 
</newCSconfig>

var/script/mgcamd_1.29_newcs_1.50_cam.sh:

Kod:

#!/bin/sh 
######################################## 
###### Powered by The Gemini Team ###### 
### http://www.i-have-a-dreambox.com ### 
######################################## 
# camid # 
# 0000 = Commom Interface # 
# 0001->0199 = for User Experiment # 
# 0199 = Dccamd # 
# 0200->0299 = Fbiss # 
# 0300->0399 = Camd3 # 
# 0400->0499 = Camx # 
# 0500->0599 = Camx-Radegast-CS # 
# 0600->0699 = Evocamd -OLD # 
# 0700->0799 = Evocamd_ronlad_cs -OLD # 
# 0800->0899 = Mgcamd -OLD # 
# 0900->0999 = Mgcamd_ronald_cs -OLD # 
# 1000->1099 = Newcamd -OLD # 
# 1100->1199 = Newcamd-ronald_CS -OLD # 
# 1200->1299 = Newcamd-spider -OLD # 
# 1300->1399 = Radegast # 
# 1400->1499 = Ronald-CS # 
# 1500->1599 = Scam # 
# 1600->1699 = Scam-Ronald-CS # 
# 1700->1799 = MPCardserver # 
# 1800->1899 = NewCS # 
# 2000->2099 = Camd3 # 
# 2300->2399 = Camd3-NewCS # 
# 2600->2699 = Camd3-MPCardserver # 
# 3000->3099 = Evocamd # 
# 3100->3199 = Evocamd-Ronald-CS # 
# 3200->3299 = Evocamd-NewCS # 
# 3300->3399 = Evocamd-MPCardserver # 
# 4000->4099 = Mgcamd # 
# 4100->4199 = Mgcamd-Ronald-CS # 
# 4200->4299 = Mgcamd-NewCS # 
# 4300->4399 = Mgcamd-MPCardserver # 
# 5000->5099 = Newcamd-Betad # 
# 5100->5199 = Newcamd-Cardserver # 
# 5200->5299 = Newcamd-Spider # 
# 5300->5399 = Newcamd-NewCS # 
# 5400->5499 = Newcamd-MPCardserver # 
# 5500->5599 = OpenCam # 
# 5600->5699 = RqCamd # 
# 6000->6099 = CCcam # 
# 6100->6199 = CCcam-Capmtserver # 
# 6200->6299 = CCcam-NewCS # 
# 9500->9599 = reserved # 
# 9600->9699 = reserved # 
# 9700->9799 = reserved # 
# 9800->9899 = reserved # 
# 9900->9999 = reserved # 
######################################## 

CAMNAME="MgCamd 1.29/NewCS 1.50" 
USERNAME="" 
ZAPTIME=6 
CAMID=4268 
DVBSET=0 
INFOFILE="ecm.info" 
INFOFILELINES= 
# end 

remove_tmp () { 
rm -rf /tmp/*.info* /tmp/*.tmp* /tmp/*mgcamd* 
} 

case "$1" in 
start) 
echo "[SCRIPT] $1: $CAMNAME" 
remove_tmp 
/var/bin/newcs_1.50 & 
sleep 20 
/var/bin/mgcamd_1.29 & 
;; 
stop) 
echo "[SCRIPT] $1: $CAMNAME" 
killall -9 mgcamd_1.29 newcs_1.50 2>/dev/null 
remove_tmp 
;; 
*) 
$0 stop 
exit 0 
;; 
esac 

exit 0

klient 192.168.0.30

var/keys/mg.cfg:

Kod:

# EMM messages 
# 00 don't show any EMMs (default) 
# 01 show only valid EMMs 
# 02 show valid and bad EMMs with complete data display 
M: { 01 } 

# ECM messages 
# 00 don't show anything about ecm 
# 01 normal mode, show pids processed, decoded ecm and cw 
# 02 verbose mode, show valid and bad ECMs with data 
C: { 01 } 

# AU 
# 00 disable, no emm pids processed 
# 01 enable, emm pids always processed for soft-au and shared cards 
# 02 auto, emm started only if channel cant be decoded 
# 03 process emm pids for network cards update only 
A: { 01 } 

# key update (sum 01 or 02 with 04) 
# 01 update only new keys, default setting 
# 02 update all keys (used for valid PMK checking) 
# 04 enable TPS au 
U: { 01 } 

# config files folder (softcam, autoroll, ignore/priority) 
# 00 files in /var/keys 
# 01 files in /tmp 
T: { 00 } 

# network mode, use summ for several clients 
# 00 no network (default) 
# 01 newcamd netclient 
# 02 radegast netclient 
# 04 camd3 netclient 
# 08 gbox netclient 
G: { 01 } 

# network retry, use summ for several options 
# 00 disable 
# 01 retry every new ecm 
# 02 try to connect to offline shares every Q: seconds 
# 04 try to detect and fast reconnect to lost (and not used atm) server 
# + XX messages number and YY seconds to reconnect 
# mg will reconnect to server, if no answer to last XX ecm/keepalive or 
# if no answer for last ecm or keepalive sent for YY seconds 
# set to 0 to disable 
N: { 07 } 5 30 

# network ecm timeout in seconds 
K: { 05 } 

# newcamd dead routes connect retry, sec 
Q: { 60 } 

# network shares priority 
# 00 gbox, newcamd, radegast, camd3 (default) 
# 01 camd3, radegast, newcamd, gbox 
# 02 newcamd, camd3, gbox, radegast 
P: { 00 } 

# on screen display type 
# 00 No OSD (default) 
# 01 neutrino 
# 02 enigma 
# 03 relook 
# + user password for http auth 
O: { 00 } username password 

# on screen display Options, summ of: 
# 01 show emu ecm 
# 02 show network shares messages 
# 04 show decoding failed / fta 
# 08 show emm keys update 
# + web port to use for osd 
S: { 03 } 80 

# Log option, summ of: 
# 00 off 
# 01 network udp log 
# 02 log to console 
# 04 file, appended ! delete it by yourself, before it eat all your hdd 
# + IP udp-port log-file-name 
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log 

# keep ecm cache, seconds 
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory, 
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings. 
E: { 15 } 

# cache option, summ of: 
# 00 Off (default) 
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list 
# 02 Ecm data cache, remember CW for (E time 
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart 
H: { 07 } 

# reread files, summ of: 
# 00 No (default) 
# 01 reread config file on channel change (including priority and ignore, but not replace/cache) 
# 02 reread SoftCam.Key on channel change 
# 04 reread SoftCam.Key if file changed 
R: { 00 } 

# debug, summ of 
# 00 off (default) 
# 01 debug ecm 
# 02 debug emm 
# 04 debug network ecm 
# 08 debug network emm 
# 16 debug network login 
# 32 show mem/cpu stats every 1 min 
# 64 add timestamp to log messages 
D: { 00 } 

# box type 
# 00 autodetect, change only if you think wrong type detected. 
# 01 dbox2 
# 02 dreambox 
# 03 triple-dragon 
# 04 relook 
# 05 openbox 
B: { 00 }

var/keys/newcamd.list:

Kod:

CWS = 192.168.1.30 10000 user1 1234 55 11 55 04 05 06 07 12 14 14 15 16 19 20 lan cardserv 
CWS = 192.168.1.30 10001 user1 1234 55 11 55 04 05 06 07 12 14 14 15 16 19 20 lan cardserv 
CWS = 127.0.0.1 10000 local local 55 11 55 04 05 06 07 12 14 14 15 16 19 20 lan cardserv 
CWS = 127.0.0.1 10001 local local 55 11 55 04 05 06 07 12 14 14 15 16 19 20 lan cardserv

var/keys/newcamd-client.txt:

Kod:

[127.0.0.1] 
port = 10000 
key = 55 11 55 04 05 06 07 12 14 14 15 16 19 20 
username = local 
password = local 
[127.0.0.1] 
port = 10001 
key = 55 11 55 04 05 06 07 12 14 14 15 16 19 20 
username = local 
password = local 

var/tuxbox/config/newcs.xml: 

<xml> 
<newCSconfig> 
<readers> 
<device> 
<name>lower</name> 
<type>Sci</type> 
<node>/dev/sci0</node> 
<export>yes</export> 
<enabled>yes</enabled> 
<blocksa>No</blocksa> 
<blockua>No</blockua> 
<blockga>No</blockga> 
<PTShandshake>no</PTShandshake> 
<crypto>no</crypto> 
<carddetect>yes</carddetect> 
<newcamd_port>10000</newcamd_port> 
<priority>hard</priority> 
<autosid>yes</autosid> 
<Seca>no</Seca> 
<sid> 
<allow> 
<id></id> 
</allow> 
<deny> 
<id></id> 
</deny> 
</sid> 
</device> 
<device> 
<name>upper</name> 
<type>Sci</type> 
<node>/dev/sci1</node> 
<export>yes</export> 
<enabled>yes</enabled> 
<blocksa>No</blocksa> 
<blockua>No</blockua> 
<blockga>No</blockga> 
<PTShandshake>no</PTShandshake> 
<crypto>no</crypto> 
<carddetect>yes</carddetect> 
<newcamd_port>10001</newcamd_port> 
<priority>hard</priority> 
<autosid>yes</autosid> 
<Seca>no</Seca> 
<sid> 
<allow> 
<id></id> 
</allow> 
<deny> 
<id></id> 
</deny> 
</sid> 
</device> 
</readers> 
<radegastserver> 
<enabled>no</enabled> 
<port>10011</port> 
<allow>ALL</allow> 
</radegastserver> 
<cache> 
<emm>10</emm> 
<ecm>10</ecm> 
</cache> 
<debug> 
<level>normal</level> 
<type>all</type> 
<output>file,all</output> 
<logfile>/tmp/newcs_log.txt</logfile> 
<console_options></console_options> 
<file_options>init,ecm,emm</file_options> 
<udp_host>192.168.0.20</udp_host> 
<udp_port>1000</udp_port> 
<udp_options></udp_options> 
<tcp_port>3001</tcp_port> 
<tcp_options></tcp_options> 
</debug> 
<newcamdserver> 
<enabled>yes</enabled> 
<name>cardserv</name> 
<deskey>55 11 55 04 05 06 07 12 14 14 15 16 19 20</deskey> 
<userfile>/tmp/users.txt</userfile> 
<user> 
<name>local</name> 
<password>local</password> 
<au>on</au> 
</user> 
</newcamdserver> 
</newCSconfig>

var/script/mgcamd_1.29_newcs_1.50_cam.sh:

Kod:

#!/bin/sh 
######################################## 
###### Powered by The Gemini Team ###### 
### http://www.i-have-a-dreambox.com ### 
######################################## 
# camid # 
# 0000 = Commom Interface # 
# 0001->0199 = for User Experiment # 
# 0199 = Dccamd # 
# 0200->0299 = Fbiss # 
# 0300->0399 = Camd3 # 
# 0400->0499 = Camx # 
# 0500->0599 = Camx-Radegast-CS # 
# 0600->0699 = Evocamd -OLD # 
# 0700->0799 = Evocamd_ronlad_cs -OLD # 
# 0800->0899 = Mgcamd -OLD # 
# 0900->0999 = Mgcamd_ronald_cs -OLD # 
# 1000->1099 = Newcamd -OLD # 
# 1100->1199 = Newcamd-ronald_CS -OLD # 
# 1200->1299 = Newcamd-spider -OLD # 
# 1300->1399 = Radegast # 
# 1400->1499 = Ronald-CS # 
# 1500->1599 = Scam # 
# 1600->1699 = Scam-Ronald-CS # 
# 1700->1799 = MPCardserver # 
# 1800->1899 = NewCS # 
# 2000->2099 = Camd3 # 
# 2300->2399 = Camd3-NewCS # 
# 2600->2699 = Camd3-MPCardserver # 
# 3000->3099 = Evocamd # 
# 3100->3199 = Evocamd-Ronald-CS # 
# 3200->3299 = Evocamd-NewCS # 
# 3300->3399 = Evocamd-MPCardserver # 
# 4000->4099 = Mgcamd # 
# 4100->4199 = Mgcamd-Ronald-CS # 
# 4200->4299 = Mgcamd-NewCS # 
# 4300->4399 = Mgcamd-MPCardserver # 
# 5000->5099 = Newcamd-Betad # 
# 5100->5199 = Newcamd-Cardserver # 
# 5200->5299 = Newcamd-Spider # 
# 5300->5399 = Newcamd-NewCS # 
# 5400->5499 = Newcamd-MPCardserver # 
# 5500->5599 = OpenCam # 
# 5600->5699 = RqCamd # 
# 6000->6099 = CCcam # 
# 6100->6199 = CCcam-Capmtserver # 
# 6200->6299 = CCcam-NewCS # 
# 9500->9599 = reserved # 
# 9600->9699 = reserved # 
# 9700->9799 = reserved # 
# 9800->9899 = reserved # 
# 9900->9999 = reserved # 
######################################## 

CAMNAME="MgCamd 1.29/NewCS 1.50" 
USERNAME="" 
ZAPTIME=6 
CAMID=4268 
DVBSET=0 
INFOFILE="ecm.info" 
INFOFILELINES= 
# end 

remove_tmp () { 
rm -rf /tmp/*.info* /tmp/*.tmp* /tmp/*mgcamd* 
} 

case "$1" in 
start) 
echo "[SCRIPT] $1: $CAMNAME" 
remove_tmp 
/var/bin/newcs_1.50 & 
sleep 20 
/var/bin/mgcamd_1.29 & 
;; 
stop) 
echo "[SCRIPT] $1: $CAMNAME" 
killall -9 mgcamd_1.29 newcs_1.50 2>/dev/null 
remove_tmp 
;; 
*) 
$0 stop 
exit 0 
;; 
esac 

exit 0

Var även inne och petade i newcamd.conf enligt manual "använda orginalkort"

Kod:

#CWS = uds 1 premiere premiere 
#CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv 
CWS = 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs 
#CWS = 127.0.0.1 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs 
#

Ursäkta all text.
jag hoppas någon vänlig själ har lust att kika på eländet.
Tackar på förhand

Ämne: gemini cs

Ämnesverktyg

Sök ämne

Visa

Trådad visning

gemini cs

Liknande ämnen

Gemini 4.70

Gemini 4.20

gemini 3,0

gemini 2.40

jpg med Gemini 2.70

Taggar för det här ämnet

Behörigheter för att posta

stöd oss

Följ oss