Enligt den stora webben:

IRD to IRD används för att kopiera mjukvara och inställningar från en humax box till en annan.

*Download Instruction for IRD to IRD.

Please follow these instructions step by step:
1. Connect the two receivers using a serial cable.
2. Switch on the master IRD, leave the slave IRD switched off.
3. The master IRD is the IRD you want to transfer data from.
4. Go to the STB Status menu on the master IRD.
5. Press "Red" -> "Green" -> " Yellow" -> " Blue" -> " White" key of the RCU in sequence.
6. one of the following buttons on the remote control depend on what you want to transfer
- Press "1" if you want to transfer the loader (change loader s/w)
- Press "2" if you want to transfer application software.
- Press "3" if you want to transfer the setting data (copy Main menu setting value).
- Press "4" if you want to transfer Information data only (bouquet and channel list).

Så jag vet inte om det hjälper direkt... :errf: