oscam finns och går att starta här: /usr/local/bin/oscam
och jag har innan kompileringen ändrat så att alla configfiler ligger i /1/
nu är ju frågan hur får jag liv i min kortläsare och vad skall stå i oscam.server?
Sedan undrar jag om det finns något fiffigt sät att starta oscam och ev annat automatiskt vid datorstart så att jag bara kan starta eyetv och börja kika?
Nu står detta i oscam.server
[reader]
Label = Phoenix
Protocol = pcsc
Device = /dev/tty.UC-232AC
Group = 1
fortfarande inte korrekt Device-angivelse men det ser ut som den hittade läsare och kort nu?
Mac-mini-server:bin Peter$ /usr/local/bin/oscam -c /1/
2010/03/02 18:08:30 690 s >> OSCam << cardserver started version 0.99.4svn, build #1812 (macosx-native)
2010/03/02 18:08:30 690 s version=0.99.4svn, build #1812, system=macosx-native-, nice=0
2010/03/02 18:08:30 690 s max. clients=509, client max. idle=120 sec
2010/03/02 18:08:30 690 s max. logsize=unlimited
2010/03/02 18:08:30 690 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/03/02 18:08:30 690 s shared memory initialized (size=4176668, fd=3)
2010/03/02 18:08:30 690 s auth size=4752
2010/03/02 18:08:30 690 s services reloaded: 0 services freed, 2 services loaded
2010/03/02 18:08:30 690 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/03/02 18:08:30 690 s signal handling initialized (type=sysv)
2010/03/02 18:08:30 690 s 770 service-id's loaded
2010/03/02 18:08:30 690 s 1 lengths for caid guessing loaded
2010/03/02 18:08:30 690 s monitor: disabled
2010/03/02 18:08:30 690 s camd 3.3x: disabled
2010/03/02 18:08:30 690 s camd 3.5x: disabled
2010/03/02 18:08:30 690 s cs378x: disabled
2010/03/02 18:08:30 690 s newcamd: initialized (fd=6, port=15050, crypted)
2010/03/02 18:08:30 690 s cccam: disabled
2010/03/02 18:08:30 690 s radegast: disabled
2010/03/02 18:08:30 690 s resolver thread started
2010/03/02 18:08:30 690 s logger started (pid=692)
2010/03/02 18:08:30 690 s resolver started (pid=693, delay=30 sec)
2010/03/02 18:08:30 690 s reader started (pid=694, device=/dev/tty.UC-232AC)
2010/03/02 18:08:30 690 s anti cascading disabled
2010/03/02 18:08:30 694 r02 card detected
2010/03/02 18:08:31 694 r02 ATR: 3F 77 18 00 00 C1 14 01 A2 68 90 00
2010/03/02 18:08:31 694 r02 type: Viaccess (standard atr), caid: 0500, serial: 3245635957
2010/03/02 18:08:32 694 r02 providers: 6 (FFF510,020500,020510,020520,020530,020540)
2010/03/02 18:08:32 694 r02 [viaccess-reader] ready for requests
2010/03/02 18:08:32 694 r02 [viaccess-reader] card detected
2010/03/02 18:08:32 694 r02 [viaccess-reader] serial: 3245635957
2010/03/02 18:08:32 694 r02 provider: 1, id: FFF510, name: BOXER, sa: C1747975, geo: empty
2010/03/02 18:08:32 694 r02 provider: 2, id: 020500, name: BOXER1, sa: C1747975, geo: FF FF FF FF
2010/03/02 18:08:33 694 r02 provider: 3, id: 020510, name: BOXER2, sa: C1747975, geo: FF FF FF FF
2010/03/02 18:08:33 694 r02 provider: 4, id: 020520, name: BOXER3, sa: C1747975, geo: FF FF FF FF
2010/03/02 18:08:33 694 r02 provider: 5, id: 020530, name: BOXER4, sa: C1747975, geo: FF FF FF FF
2010/03/02 18:08:33 694 r02 provider: 6, id: 020540, name: BOXER5, sa: C1747975, geo: FF FF FF FF
Ser rätt ut, så långt, ser ingen "user" ansluta sig. Har du EyetvCamd ingång?
Kom ihåg att man måste i början välja Ident åt EyecamdTV, för boxer är det 023200, för varje kanal markera den Ident och klicka på "Save CA cahe"
Lustigt att den fungerar utan device definition, kan det vara så att för protokoll pcsc inte behövs definira en device? Vet ej...
/C
menar du att allt är som det skall i oscam och jag nu skall fokusera på eyetvcamd?
Var ser du att ingen user är ansluten och är det orsaken till att kanalerna inte fungerar?
Log från eyetvcamd vid uppstart
camd3: connected to server 127.0.0.1:65535
newcamd: connecting to server 127.0.0.1:15050...
[general.error] failed open /Users/Peter/Documents/eyetvCamd/SoftCam.Key: No such file or directory
[general.error] no keys loaded for softcam!
[core.load] ** registered systems:
[core.load] ** Seca (pri -10)
[core.load] ** Irdeto (pri -10)
[core.load] ** Cryptoworks (pri -10)
[core.load] ** ConstCW (pri -20)
[core.load] ** Conax (pri -10)
[core.load] ** Nagra2 (pri -10)
[core.load] ** Nagra (pri -10)
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
detta kommer då jag starta eyetv
cwdwplug: plugin initialized
cwdwplug: GetInfo
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
cwdwplug: Device with id 101 and Index = 0 added
cwdwplug: service change API called: globals = 0x286fe00, deviceid = 101
cwdwplug: ServiceChanged:
cwdwplug: Active PID: 0, type: 9
cwdwplug: Active PID: 423, type: 0
cwdwplug: Active PID: 422, type: 1
cwdwplug: Active PID: 420, type: 2
cwdwplug: Active PID: 35, type: 5
cwdwplug: Active PID: 61, type: 5
cwdwplug: Active PID: 80, type: 5
cwdwplug: Active PID: 41a, type: 4
cwdwplug: Active PID: 423, type: 3
cwdwplug: Active PID: 11, type: 9
cwdwplug: Active PID: 12, type: 9
cwdwplug: Active PID: 14, type: 9
cwdwplug: Active PID: 13, type: 9
cwdwplug: HeadendID: 40111, TransponderID: 2cf12080, ServiceID: 41a, PMT pid: 41a
cwdwplug: Device with id 102 and Index = 0 added
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
cwdwplug: service change API called: globals = 0x286fe00, deviceid = 102
cwdwplug: ServiceChanged:
cwdwplug: Active PID: 0, type: 9
cwdwplug: Active PID: 423, type: 0
cwdwplug: Active PID: 422, type: 1
cwdwplug: Active PID: 420, type: 2
cwdwplug: Active PID: 35, type: 5
cwdwplug: Active PID: 61, type: 5
cwdwplug: Active PID: 80, type: 5
cwdwplug: Active PID: 41a, type: 4
cwdwplug: Active PID: 423, type: 3
cwdwplug: Active PID: 11, type: 9
cwdwplug: Active PID: 12, type: 9
cwdwplug: Active PID: 14, type: 9
cwdwplug: Active PID: 13, type: 9
cwdwplug: HeadendID: 40111, TransponderID: 2cf12080, ServiceID: 41a, PMT pid: 41a
cwdwplug: service change API called: globals = 0x286fe00, deviceid = 101
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: server 127.0.0.1:15050 closed connection.
ser detta bra ut eller?
Det ser halvbra, Eyetv prata med EyetvCamd, Bra.
EyetvCamd kopplar ej upp sig till Oscam:
i EyetvCamd under sever, ta bort allt från camd3 raden. (om du inte har en annan camd3 server igång!)
För newcamd, har du rätt "key", det ska vara samma som finns i oscam.conf och under [newcamd] delen.
/C
ok, så i eyetvcamd skall jag bara ha:
ncd525, valfritt usernamn, valfritt password, 127.0.0.1 som host, 15050 som port, och valfri nyckel?
HAr märkt att det inte blir någon skillnad oavsett user så det verkar inte som det connectar som det skall?
nu när jag startar eyetvcamd verkar det som user connectar men fortfarande ingen kanal:
[general.error] failed open /Users/Peter/Documents/eyetvCamd/SoftCam.Key: No such file or directory
[general.error] no keys loaded for softcam!
[core.load] ** registered systems:
[core.load] ** Seca (pri -10)
[core.load] ** Irdeto (pri -10)
[core.load] ** Cryptoworks (pri -10)
[core.load] ** ConstCW (pri -20)
[core.load] ** Conax (pri -10)
[core.load] ** Nagra2 (pri -10)
[core.load] ** Nagra (pri -10)
newcamd: connecting to server 127.0.0.1:15050...
newcamd: connected to server 127.0.0.1:15050.
newcamd: 127.0.0.1:15050: random bytes received...
newcamd: 127.0.0.1:15050: send DATA_REQ...
newcamd: 127.0.0.1:15050: Authorization done.
newcamd: 127.0.0.1:15050: Cards present:
cwdwplug: plugin initialized
cwdwplug: GetInfo
cwdwplug: Device with id 101 and Index = 0 added
cwdwplug: service change API called: globals = 0x2857800, deviceid = 101
cwdwplug: ServiceChanged:
cwdwplug: Active PID: 0, type: 9
cwdwplug: Active PID: 14f9, type: 0
cwdwplug: Active PID: 14f8, type: 1
cwdwplug: Active PID: 14f6, type: 2
cwdwplug: Active PID: 32, type: 5
cwdwplug: Active PID: 68, type: 5
cwdwplug: Active PID: 81, type: 5
cwdwplug: Active PID: 14f0, type: 4
cwdwplug: Active PID: 14f9, type: 3
cwdwplug: Active PID: 11, type: 9
cwdwplug: Active PID: 12, type: 9
cwdwplug: Active PID: 14, type: 9
cwdwplug: Active PID: 13, type: 9
cwdwplug: HeadendID: 40111, TransponderID: 2cf12080, ServiceID: 14f0, PMT pid: 14f0
cwdwplug: Device with id 102 and Index = 0 added
cwdwplug: service change API called: globals = 0x2857800, deviceid = 101
cwdwplug: service change API called: globals = 0x2857800, deviceid = 102
cwdwplug: ServiceChanged:
cwdwplug: Active PID: 0, type: 9
cwdwplug: Active PID: 423, type: 0
cwdwplug: Active PID: 422, type: 1
cwdwplug: Active PID: 420, type: 2
cwdwplug: Active PID: 35, type: 5
cwdwplug: Active PID: 61, type: 5
cwdwplug: Active PID: 80, type: 5
cwdwplug: Active PID: 41a, type: 4
cwdwplug: Active PID: 423, type: 3
cwdwplug: Active PID: 11, type: 9
cwdwplug: Active PID: 12, type: 9
cwdwplug: Active PID: 14, type: 9
cwdwplug: Active PID: 13, type: 9
cwdwplug: HeadendID: 40111, TransponderID: 2cf12080, ServiceID: 41a, PMT pid: 41a
det är några error i början vad betyder de eller är det oviktigt?
finns en massa knappar i eyetvcamd som tex Enable EMU under server och Enable EMM under Log and PMT, vd är det och skall jag göra något med dem?
stämmer med tillägg att "valfri" betyder åxå att det ska vara samma som oscam.conf och under [newcamd] delen och oscam.user.
/C
Behörigheter för att posta
Svara med citat