EDIT#2: Visade sig att jag hade två konto här på Comhit =)
Vänligen se nedersta EDIT för det senaste, har lyckats ansluta till servern nu men då blev det nya problem =)
Här kommer min newcs.xml
Men ska jag verkligen använda newCS? räcker det inte med MgCamd?Kod:<?xml version="1.0"?> <!-- For setup-issues, look in readme.txt! If there are other troubles, try different forums or irc channels around :o) The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf. ** This is the example file for Dreambox/TD etc. that use SCI interfaces. --> <newCSconfig> <readers name="Card Readers"> <device> <name>lower</name> <type>sci</type> <mhz>600</mhz> <node>/dev/sci0</node> <parity>odd</parity> <reset>normal</reset> <export>Yes</export> <enabled>Yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <!-- <boxkey>0000000000</boxkey> --> <!-- <rsa>0000000000</rsa> --> <irdeto-camkey>0000000000000000</irdeto-camkey> <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> <crypto-special>No</crypto-special> <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>34000</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> </device> <!-- <device> --> <name>upper</name> <type>sci</type> <mhz>600</mhz> <node>/dev/sci1</node> <parity>odd</parity> <reset>normal</reset> <export>Yes</export> <enabled>Yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <!-- <boxkey>0000000000</boxkey> --> <!-- <rsa>0000000000</rsa> --> <irdeto-camkey>0000000000000000</irdeto-camkey> <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> <crypto-special>No</crypto-special> <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>34001</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> <!-- </device> --> <device> <name>smargo</name> <type>phoenix</type> <mhz>600</mhz> <parity>none</parity> <node>/dev/usb/ttyUSB0</node> <export>Yes</export> <enabled>No</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>Yes</blockga> <blockc0>No</blockc0> <boxkey>00000000</boxkey> <crypto-special>No</crypto-special> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>34002</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> <sid> <allow> </allow> <deny> <id></id> </deny> </sid> </device> </readers> <radegastserver> <enabled>No</enabled> <port>16000</port> <allow> <hostname>localhost</hostname> </allow> </radegastserver> <cache> <emm>20</emm> <ecm>-1</ecm> </cache> <httpd> <server> <!-- Port to accept connections on --> <port>8080</port> <enabled>yes</enabled> </server> <user> <!-- valid value for userfile are: Any username you'd like - Used for browser to logon (its case sensitive). --> <name>newcs</name> <!-- valid value for password are: Any password you'd like - Used for browser to logon (its case sensitive). --> <password>newcs</password> <!-- valid value for accesslevel are: admin, stats - Define what rights the user has in the web-console --> <accesslevel>admin</accesslevel> </user> </httpd> <debug> <password>NewCSpwd</password> <level>normal</level> <type>init</type> <output>console,tcp</output> <console_options>normal,init</console_options> <tcp_port>1001</tcp_port> <tcp_options>normal,init</tcp_options> </debug> <newcamdserver> <enabled>Yes</enabled> <name>newcs</name> <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey> <user> <name>dummy</name> <password>dummy</password> <hostname>localhost</hostname> <port>12000</port> <au>on</au> <sidoverride>off</sidoverride> <spider>No</spider> <rate>2</rate> </user> <user> <name>mpcs</name> <password>dummy</password> <au>No</au> <spider>No</spider> <sidoverride>No</sidoverride> <readers> <allow>lower</allow> <allow>smargo</allow> </readers> <rate>0</rate> </user> </newcamdserver> </newCSconfig>
EDIT:
Jag stände av cmgcam via boxens interface och startade den igen via telnet.
Får nu följande fel:
Kod:root@dm600pvr:/bin> mgcamd_1.35a tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:04) [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:17 2.16.1.1:28007 Reread:0 [mg] Ecm cache time: 15 Box type: dreambox root@dm600pvr:/bin> Conax.Key error 2: No such file or directory SoftCam.Key error 2: No such file or directory AutoRoll.Key error 2: No such file or directory Conax.Key error 2: No such file or directory [config] newcamd route = user02:*serverns ip*:34004 server domän newcamd keep alive: 300, incoming port: 21000 [mgcam] emm thread started [newcamd] Connecting to *serverns ip*:34004... got 150 cmd 9F [mg0] namespace EEEE0000 t-id 3FE on-id 22F1 [mg0] descramble on 1, source 1 [mg0] service 46A index 0 pmt pid 46A (1), pids: video 0x0473, audio 0x0472 0x0 470 [mg0] ECM: CaID: 0x0500 -> CaPID: 0x004C ProvID: 020500 [mg0] ECM: CaID: 0x0500 -> CaPID: 0x0067 ProvID: 023200 [mg0] ECM: CaID: 0x0500 -> CaPID: 0x0088 ProvID: 040D00 [mg0] No viaccess key(s) found for id 20500 keynr 08 [mg0] network can't decode [mg0] pid 0x004C failed to decode. [mg0] No viaccess key(s) found for id 23200 keynr 08 [mg0] network can't decode [mg0] pid 0x0067 failed to decode. [mg0] No viaccess key(s) found for id 40D00 keynr 08 [mg0] network can't decode [mg0] pid 0x0088 failed to decode. [mgcamd] emm started EMM: CaID: 0x0500 -> CaPID: 0x002A ProvID: 020500 EMM: CaID: 0x0500 -> CaPID: 0x002A ProvID: 040D00 EMM: CaID: 0x0500 -> CaPID: 0x003A ProvID: 023200 [mgcamd] emm stopped
Svara med citat
