HTPC med TBS 6920 s kort

[juppe]

jo, men du måste ju ha något som läser av ditt abbonemangskort från CD ju, ska gå att få ACAmd att göra det tror jag, men jag vet inte hur det funkar tyvärr.

[RedRay]

Har nu gjort ett så kallat lappkast.
Fick tipset att köra med DVBViewr + Recording service sen lägga en multishortcut
i MediaPortal så startar DvbViewer när jag väljer tv i Mediaportal.
Men vad menas med att lägga en multishortcut i Mediaportal och hur ?

Utdrag från Acamd när jag kör DVBviewer, har lagt acamd i DVBviewer/plugin.
Någon som kan se vad som går fel här, i dessa loggar ?

20:26:15.009: ACamd v0.6.2.0
20:26:15.065: FFdecsa mode...
20:26:15.066: systems: registering CA system Cardclient, pri -15, ident 1000
20:26:15.066: structloaders: registering loader cardclient config
20:26:15.066: cardclients: registering cardclient Newcamd
20:26:15.066: cardclients: registering cardclient Newcamd2
20:26:15.066: cardclients: registering cardclient CCcamN
20:26:15.066: cardclients: registering cardclient Radegast
20:26:15.066: cardclients: registering cardclient Camd35
20:26:15.066: structloaders: registering loader smartcard data
20:26:15.066: systems: registering CA system SC-Irdeto, pri -10, ident 1001
20:26:15.066: feature: using feature SMARTCARD
20:26:15.066: registering Irdeto smartcard (id 49726474)
20:26:15.066: systems: registering CA system SC-Seca, pri -10, ident 1002
20:26:15.066: registering Seca smartcard (id 53656361)
20:26:15.066: systems: registering CA system SC-Viaccess, pri -10, ident 1003
20:26:15.066: registering Viaccess smartcard (id 56696173)
20:26:15.066: systems: registering CA system SC-Conax, pri -10, ident 1004
20:26:15.066: registering Conax smartcard (id 436f6e78)
20:26:15.066: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
20:26:15.066: registering Cryptoworks smartcard (id 4372576f)
20:26:15.066: systems: registering CA system SC-Nagra, pri -10, ident 1006
20:26:15.066: registering Nagra smartcard (id 4e616772)
20:26:15.066: systems: registering CA system SC-NDS, pri -10, ident 1007
20:26:15.066: registering NDS smartcard (id 56694732)
20:26:15.071: Monitor listen on port 47265
20:26:15.112: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
20:26:15.113: Engine [DVB Viewer Pro]
20:26:15.113: loading smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:26:15.113: loaded 0 smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:26:15.113: loading cardclient config from C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf
20:26:15.113: now using protocol version 525 (cdLen=8)
20:26:15.113: hostname=localhost port=16000 emm=1 emmCaids 0b00/ff00
20:26:15.113: init of cardclient 'newcamd' failed
20:26:15.113: file C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf has error in line #3
20:26:15.113: ** registered systems:
20:26:15.113: ** SC-NDS (pri -10)
20:26:15.113: ** SC-Nagra (pri -10)
20:26:15.113: ** SC-Cryptoworks (pri -10)
20:26:15.113: ** SC-Conax (pri -10)
20:26:15.113: ** SC-Viaccess (pri -10)
20:26:15.113: ** SC-Seca (pri -10)
20:26:15.113: ** SC-Irdeto (pri -10)
20:26:15.113: ** Cardclient (pri -15)
20:26:15.113: no smartcard interface defined!
20:26:15.969:
20:26:15.969: Ch: 38 - Animal Planet
20:26:15.969: Programm crc: BB53AEA9
20:26:15.972: PMT: ACamd_PMT.txt, search, not found PMT=0026 (AND SID=0197)
20:26:15.972: 0x0026 0x0197 0x0B00 0x00000000 0x0065 0x0030 11111110
20:26:15.981: Incomming PackageSize [188]
20:26:44.421:
20:26:44.421: Ch: 258 - Eurosport (swe)
20:26:44.421: Programm crc: 8F245289
20:26:44.720: PMT: ACamd_PMT.txt, search, not found PMT=0102 (AND SID=0389)
20:26:44.720: 0x0102 0x0389 0x0B00 0x00000000 0x0041 0x0030 11111110
20:26:59.142:
20:26:59.142: Ch: 270 - Lifestyle TV
20:26:59.142: Programm crc: 51004918
20:26:59.353: PMT: ACamd_PMT.txt, search, not found PMT=010E (AND SID=0AF6)
20:26:59.353: 0x010E 0x0AF6 0x0B00 0x00000000 0x0000 0x0030 11111110

Ser ju att det är hex i cardclient.conf has error in line #3

Det ända som står där är :
#
# Comment lines can start with # or ;
newcamd:Localhost/0B00/ffff:xxxx:xxxxx:xx xx xx xx xx 32 27 08 09 10 11 12 13 14

---------------
20:59:55.540: ACamd v0.6.2.0
20:59:55.595: FFdecsa mode...
20:59:55.595: systems: registering CA system Cardclient, pri -15, ident 1000
20:59:55.595: structloaders: registering loader cardclient config
20:59:55.595: cardclients: registering cardclient Newcamd
20:59:55.595: cardclients: registering cardclient Newcamd2
20:59:55.595: cardclients: registering cardclient CCcamN
20:59:55.595: cardclients: registering cardclient Radegast
20:59:55.595: cardclients: registering cardclient Camd35
20:59:55.595: structloaders: registering loader smartcard data
20:59:55.595: systems: registering CA system SC-Irdeto, pri -10, ident 1001
20:59:55.595: feature: using feature SMARTCARD
20:59:55.595: registering Irdeto smartcard (id 49726474)
20:59:55.595: systems: registering CA system SC-Seca, pri -10, ident 1002
20:59:55.595: registering Seca smartcard (id 53656361)
20:59:55.595: systems: registering CA system SC-Viaccess, pri -10, ident 1003
20:59:55.595: registering Viaccess smartcard (id 56696173)
20:59:55.595: systems: registering CA system SC-Conax, pri -10, ident 1004
20:59:55.595: registering Conax smartcard (id 436f6e78)
20:59:55.595: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
20:59:55.595: registering Cryptoworks smartcard (id 4372576f)
20:59:55.595: systems: registering CA system SC-Nagra, pri -10, ident 1006
20:59:55.595: registering Nagra smartcard (id 4e616772)
20:59:55.595: systems: registering CA system SC-NDS, pri -10, ident 1007
20:59:55.595: registering NDS smartcard (id 56694732)
20:59:55.600: Monitor listen on port 54826
20:59:55.643: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
20:59:55.643: Engine [DVB Viewer Pro]
20:59:55.643: loading smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:59:55.643: loaded 0 smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:59:55.643: loading cardclient config from C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf
20:59:55.643: now using protocol version 525 (cdLen=8)
20:59:55.643: init of cardclient 'newcamd' failed
20:59:55.643: file C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf has error in line #3
20:59:55.643: ** registered systems:
20:59:55.643: ** SC-NDS (pri -10)
20:59:55.643: ** SC-Nagra (pri -10)
20:59:55.643: ** SC-Cryptoworks (pri -10)
20:59:55.643: ** SC-Conax (pri -10)
20:59:55.643: ** SC-Viaccess (pri -10)
20:59:55.643: ** SC-Seca (pri -10)
20:59:55.643: ** SC-Irdeto (pri -10)
20:59:55.643: ** Cardclient (pri -15)
20:59:55.643: no smartcard interface defined!
20:59:56.460:
20:59:56.460: Ch: 270 - Lifestyle TV
20:59:56.460: Programm crc: 51004918
20:59:56.460: PMT: ACamd_PMT.txt, search, not found PMT=010E (AND SID=0AF6)
20:59:56.461: 0x010E 0x0AF6 0x0B00 0x00000000 0x0000 0x0030 11111110
20:59:56.475: Incomming PackageSize [188]
21:00:38.626:
21:00:38.626: Ch: 256 - TV4
21:00:38.626: Programm crc: 6E60B88A
21:00:38.631: PMT: ACamd_PMT.txt, search, not found PMT=0100 (AND SID=0642)
21:00:38.631: 0x0100 0x0642 0x0B00 0x00000000 0x0040 0x0030 11111110
21:02:50.739:
21:02:50.739: Ch: 256 - TV4
21:02:50.739: Programm crc: 6E60B88A
21:02:50.739: PMT: ACamd_PMT.txt, search, not found PMT=0100 (AND SID=0642)
21:02:50.739: 0x0100 0x0642 0x0B00 0x00000000 0x0040 0x0030 11111110
21:03:24.884:
21:03:24.884: Ch: 260 - CCTV News
21:03:24.884: Programm crc: FD362DD4
21:03:24.889: PMT: ACamd_PMT.txt, search, not found PMT=0104 (AND SID=0207)
21:03:24.889: 0x0104 0x0207 0x0B00 0x00000000 0x0000 0x0030 11111110