HTPC med TBS 6920 s kort

[RedRay]

Har nu gjort ett så kallat lappkast.
Fick tipset att köra med DVBViewr + Recording service sen lägga en multishortcut
i MediaPortal så startar DvbViewer när jag väljer tv i Mediaportal.
Men vad menas med att lägga en multishortcut i Mediaportal och hur ?

Utdrag från Acamd när jag kör DVBviewer, har lagt acamd i DVBviewer/plugin.
Någon som kan se vad som går fel här, i dessa loggar ?

20:26:15.009: ACamd v0.6.2.0
20:26:15.065: FFdecsa mode...
20:26:15.066: systems: registering CA system Cardclient, pri -15, ident 1000
20:26:15.066: structloaders: registering loader cardclient config
20:26:15.066: cardclients: registering cardclient Newcamd
20:26:15.066: cardclients: registering cardclient Newcamd2
20:26:15.066: cardclients: registering cardclient CCcamN
20:26:15.066: cardclients: registering cardclient Radegast
20:26:15.066: cardclients: registering cardclient Camd35
20:26:15.066: structloaders: registering loader smartcard data
20:26:15.066: systems: registering CA system SC-Irdeto, pri -10, ident 1001
20:26:15.066: feature: using feature SMARTCARD
20:26:15.066: registering Irdeto smartcard (id 49726474)
20:26:15.066: systems: registering CA system SC-Seca, pri -10, ident 1002
20:26:15.066: registering Seca smartcard (id 53656361)
20:26:15.066: systems: registering CA system SC-Viaccess, pri -10, ident 1003
20:26:15.066: registering Viaccess smartcard (id 56696173)
20:26:15.066: systems: registering CA system SC-Conax, pri -10, ident 1004
20:26:15.066: registering Conax smartcard (id 436f6e78)
20:26:15.066: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
20:26:15.066: registering Cryptoworks smartcard (id 4372576f)
20:26:15.066: systems: registering CA system SC-Nagra, pri -10, ident 1006
20:26:15.066: registering Nagra smartcard (id 4e616772)
20:26:15.066: systems: registering CA system SC-NDS, pri -10, ident 1007
20:26:15.066: registering NDS smartcard (id 56694732)
20:26:15.071: Monitor listen on port 47265
20:26:15.112: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
20:26:15.113: Engine [DVB Viewer Pro]
20:26:15.113: loading smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:26:15.113: loaded 0 smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:26:15.113: loading cardclient config from C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf
20:26:15.113: now using protocol version 525 (cdLen=8)
20:26:15.113: hostname=localhost port=16000 emm=1 emmCaids 0b00/ff00
20:26:15.113: init of cardclient 'newcamd' failed
20:26:15.113: file C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf has error in line #3
20:26:15.113: ** registered systems:
20:26:15.113: ** SC-NDS (pri -10)
20:26:15.113: ** SC-Nagra (pri -10)
20:26:15.113: ** SC-Cryptoworks (pri -10)
20:26:15.113: ** SC-Conax (pri -10)
20:26:15.113: ** SC-Viaccess (pri -10)
20:26:15.113: ** SC-Seca (pri -10)
20:26:15.113: ** SC-Irdeto (pri -10)
20:26:15.113: ** Cardclient (pri -15)
20:26:15.113: no smartcard interface defined!
20:26:15.969:
20:26:15.969: Ch: 38 - Animal Planet
20:26:15.969: Programm crc: BB53AEA9
20:26:15.972: PMT: ACamd_PMT.txt, search, not found PMT=0026 (AND SID=0197)
20:26:15.972: 0x0026 0x0197 0x0B00 0x00000000 0x0065 0x0030 11111110
20:26:15.981: Incomming PackageSize [188]
20:26:44.421:
20:26:44.421: Ch: 258 - Eurosport (swe)
20:26:44.421: Programm crc: 8F245289
20:26:44.720: PMT: ACamd_PMT.txt, search, not found PMT=0102 (AND SID=0389)
20:26:44.720: 0x0102 0x0389 0x0B00 0x00000000 0x0041 0x0030 11111110
20:26:59.142:
20:26:59.142: Ch: 270 - Lifestyle TV
20:26:59.142: Programm crc: 51004918
20:26:59.353: PMT: ACamd_PMT.txt, search, not found PMT=010E (AND SID=0AF6)
20:26:59.353: 0x010E 0x0AF6 0x0B00 0x00000000 0x0000 0x0030 11111110

Ser ju att det är hex i cardclient.conf has error in line #3

Det ända som står där är :
#
# Comment lines can start with # or ;
newcamd:Localhost/0B00/ffff:xxxx:xxxxx:xx xx xx xx xx 32 27 08 09 10 11 12 13 14

---------------
20:59:55.540: ACamd v0.6.2.0
20:59:55.595: FFdecsa mode...
20:59:55.595: systems: registering CA system Cardclient, pri -15, ident 1000
20:59:55.595: structloaders: registering loader cardclient config
20:59:55.595: cardclients: registering cardclient Newcamd
20:59:55.595: cardclients: registering cardclient Newcamd2
20:59:55.595: cardclients: registering cardclient CCcamN
20:59:55.595: cardclients: registering cardclient Radegast
20:59:55.595: cardclients: registering cardclient Camd35
20:59:55.595: structloaders: registering loader smartcard data
20:59:55.595: systems: registering CA system SC-Irdeto, pri -10, ident 1001
20:59:55.595: feature: using feature SMARTCARD
20:59:55.595: registering Irdeto smartcard (id 49726474)
20:59:55.595: systems: registering CA system SC-Seca, pri -10, ident 1002
20:59:55.595: registering Seca smartcard (id 53656361)
20:59:55.595: systems: registering CA system SC-Viaccess, pri -10, ident 1003
20:59:55.595: registering Viaccess smartcard (id 56696173)
20:59:55.595: systems: registering CA system SC-Conax, pri -10, ident 1004
20:59:55.595: registering Conax smartcard (id 436f6e78)
20:59:55.595: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
20:59:55.595: registering Cryptoworks smartcard (id 4372576f)
20:59:55.595: systems: registering CA system SC-Nagra, pri -10, ident 1006
20:59:55.595: registering Nagra smartcard (id 4e616772)
20:59:55.595: systems: registering CA system SC-NDS, pri -10, ident 1007
20:59:55.595: registering NDS smartcard (id 56694732)
20:59:55.600: Monitor listen on port 54826
20:59:55.643: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
20:59:55.643: Engine [DVB Viewer Pro]
20:59:55.643: loading smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:59:55.643: loaded 0 smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:59:55.643: loading cardclient config from C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf
20:59:55.643: now using protocol version 525 (cdLen=8)
20:59:55.643: init of cardclient 'newcamd' failed
20:59:55.643: file C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf has error in line #3
20:59:55.643: ** registered systems:
20:59:55.643: ** SC-NDS (pri -10)
20:59:55.643: ** SC-Nagra (pri -10)
20:59:55.643: ** SC-Cryptoworks (pri -10)
20:59:55.643: ** SC-Conax (pri -10)
20:59:55.643: ** SC-Viaccess (pri -10)
20:59:55.643: ** SC-Seca (pri -10)
20:59:55.643: ** SC-Irdeto (pri -10)
20:59:55.643: ** Cardclient (pri -15)
20:59:55.643: no smartcard interface defined!
20:59:56.460:
20:59:56.460: Ch: 270 - Lifestyle TV
20:59:56.460: Programm crc: 51004918
20:59:56.460: PMT: ACamd_PMT.txt, search, not found PMT=010E (AND SID=0AF6)
20:59:56.461: 0x010E 0x0AF6 0x0B00 0x00000000 0x0000 0x0030 11111110
20:59:56.475: Incomming PackageSize [188]
21:00:38.626:
21:00:38.626: Ch: 256 - TV4
21:00:38.626: Programm crc: 6E60B88A
21:00:38.631: PMT: ACamd_PMT.txt, search, not found PMT=0100 (AND SID=0642)
21:00:38.631: 0x0100 0x0642 0x0B00 0x00000000 0x0040 0x0030 11111110
21:02:50.739:
21:02:50.739: Ch: 256 - TV4
21:02:50.739: Programm crc: 6E60B88A
21:02:50.739: PMT: ACamd_PMT.txt, search, not found PMT=0100 (AND SID=0642)
21:02:50.739: 0x0100 0x0642 0x0B00 0x00000000 0x0040 0x0030 11111110
21:03:24.884:
21:03:24.884: Ch: 260 - CCTV News
21:03:24.884: Programm crc: FD362DD4
21:03:24.889: PMT: ACamd_PMT.txt, search, not found PMT=0104 (AND SID=0207)
21:03:24.889: 0x0104 0x0207 0x0B00 0x00000000 0x0000 0x0030 11111110