Via + dreambox

[zyx_11]

Tack så mycket för hjälpen. Jag hade alltså nästan gjort rätt då. Nu funkar allt. Slarvfel smyger lätt in när man är frustrerad över vad som är fel.

[FONT=Verdana, Arial, Helvetica, sans-serif][newcamd]
key = 000102030405060708091011121314
port = 24500@093e:000000

[/FONT][FONT=Verdana, Arial, Helvetica, sans-serif]CWS = 192.168.1.116 24500 viadm viadm 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs[/FONT]

lan newcs kan du ta bort från CWS raden.

Posta loggar från OSCam och MgCamd om det inte funkar nu.

[Chruz]

vad ska jag ha för dist till två stycken adteknik usb mp3.6 läsare, såhär ser det ut när jag startar oscam, jag kör en x86 intel pc med debian som plattform. jag har via och cd.

>> OSCam << cardserver started at Wed Jan 19 10:35:56 2011
-------------------------------------------------------------------------------
2011/01/19 10:35:56 3054 s version=0.99.4svn, build #1387, system=i686-pc-linux, nice=-1
2011/01/19 10:35:56 3054 s max. clients=509, client max. idle=120 sec
2011/01/19 10:35:56 3054 s max. logsize=unlimited
2011/01/19 10:35:56 3054 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/01/19 10:35:56 3054 s shared memory initialized (size=4182620, id=425994)
2011/01/19 10:35:56 3054 s auth size=4744
2011/01/19 10:35:56 3054 s Cannot open file "/usr/local/etc/oscam.services" (errno=2)
2011/01/19 10:35:56 3054 s userdb reloaded: 0 accounts freed, 9 accounts loaded, 0 expired, 0 disabled
2011/01/19 10:35:56 3054 s signal handling initialized (type=sysv)
2011/01/19 10:35:56 3054 s can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2011/01/19 10:35:56 3054 s monitor: initialized (fd=7, port=988)
2011/01/19 10:35:56 3054 s camd 3.3x: disabled
2011/01/19 10:35:56 3054 s camd 3.5x: disabled
2011/01/19 10:35:56 3054 s cs378x: disabled
2011/01/19 10:35:56 3054 s newcamd: initialized (fd=8, port=10000, crypted)
2011/01/19 10:35:56 3054 s CAID: 0B00
2011/01/19 10:35:56 3054 s provid #0: 000000
2011/01/19 10:35:56 3054 s newcamd: initialized (fd=9, port=10001, crypted)
2011/01/19 10:35:56 3054 s CAID: 093E
2011/01/19 10:35:56 3054 s provid #0: 000000
2011/01/19 10:35:56 3054 s radegast: disabled
2011/01/19 10:35:56 3054 s resolver thread started
2011/01/19 10:35:56 3054 s logger started (pid=3056)
2011/01/19 10:35:56 3054 s resolver started (pid=3057, delay=30 sec)
2011/01/19 10:35:56 3054 s reader started (pid=3058, device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2011/01/19 10:35:56 3054 s reader started (pid=3059, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/01/19 10:35:56 3054 s Waiting for local card init ....
2011/01/19 10:35:58 3058 r02 card detected
2011/01/19 10:35:58 3059 r03 card detected
2011/01/19 10:36:05 3059 r03 Error activating card: -10
2011/01/19 10:36:05 3058 r02 Error activating card: -10
2011/01/19 10:36:12 3058 r02 Error activating card: -10
2011/01/19 10:36:12 3059 r03 Error activating card: -10

min oscam.conf

[global]
nice = -1
WaitForCards = 1
# logging
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
# monitor
[monitor]
port = 988
aulow = 120
monlevel = 1
# web interface
[webif]
httpport = 1234
httpuser = temp
httppwd = temp
httpallowed = 127.0.0.1,192.168.2.1-192.168.2.255
# protocols
[newcamd]
key = 123456789123456789
port = 13000@0B00:000000 #------Here is my Canal Digital
port = 13001@093E:000000 #------Here is my Viasat

min oscam.server

[reader]
Label = Canal Digital
Protocol = mouse
Detect = CD
Device = /dev/ttyUSB1
Cardmhz = 358
Group = 1
CAID = 0B00
EMMCache = 1,1,2
Fallback = 0
[reader]
Label = Viasat
Protocol = mouse
Detect = CD
Device = /dev/ttyUSB0
Cardmhz = 358
Group = 1
CAID = 093E
BoxID = XXXXXXX
EMMCache = 1,1,2
Fallback = 0


min oscam.user

[account]
user = dm500
pwd = dm500
monlevel = 1
uniq = 0
group = 1,2
au = 1
#500
[account]
user = dm800
pwd = dm800
monlevel = 1
uniq = 0
group = 1,2
au = 0
#800


Kan någon se nnågot problem?
Mycket tacksam för hjälp....

[deas]

Ändra Protocol = mouse till Protocol = mp35 under [reader]

[xe0n]

Har samma problem här, Sitter mer eller mindre och väntar på att någon ska hitta en lösning.
Har finkammat alla forum utan vidare resultat. :-(

[deas]

Vad är det för problem du har?

[xe0n]

Vad är det för problem du har?

Precis samma fel som Chruz beskriver i inlägg #49 -> http://www.comhit.net/showthread.php...l=1#post165092

Har oscam-0.99.4svn1014
Och en cardproxy som loggar in som "proxyFan"

Loggfilen:

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Thu Jan 20 05:54:03 2011
-------------------------------------------------------------------------------
2011/01/20  5:54:03   8114 s   version=0.99.4svn, build #1014, system=x86_64-pc-linux, nice=-1
2011/01/20  5:54:03   8114 s   max. clients=509, client max. idle=120 sec
2011/01/20  5:54:03   8114 s   max. logsize=unlimited
2011/01/20  5:54:03   8114 s   client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/01/20  5:54:03   8114 s   shared memory initialized (size=7162156, id=655360)
2011/01/20  5:54:03   8114 s   auth size=8864
2011/01/20  5:54:03   8114 s   Cannot open file "/usr/local/etc/oscam.services" (errno=2)
2011/01/20  5:54:03   8114 s   userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired
2011/01/20  5:54:03   8114 s   signal handling initialized (type=sysv)
2011/01/20  5:54:03   8114 s   can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2011/01/20  5:54:03   8115 s   monitor: initialized (fd=6, port=988)
2011/01/20  5:54:03   8115 s   camd 3.3x: disabled
2011/01/20  5:54:03   8115 s   camd 3.5x: disabled
2011/01/20  5:54:03   8115 s   cs378x: disabled
2011/01/20  5:54:03   8115 s   newcamd: initialized (fd=7, port=34001, crypted)
2011/01/20  5:54:03   8115 s   CAID: 093E
2011/01/20  5:54:03   8115 s   provid #0: 000000
2011/01/20  5:54:03   8115 s   radegast: disabled
2011/01/20  5:54:03   8115 s   resolver thread started
2011/01/20  5:54:03   8115 s   logger started (pid=8117)
2011/01/20  5:54:03   8115 s   resolver started (pid=8118, delay=30 sec)
2011/01/20  5:54:03   8115 s   reader started (pid=8119, device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2011/01/20  5:54:03   8115 s   Waiting for local card init ....
2011/01/20  5:54:06   8119 r02 card detected
2011/01/20  5:54:12   8119 r02 Error activating card: -10
2011/01/20  5:54:19   8119 r02 Error activating card: -10
2011/01/20  5:54:26   8119 r02 Error activating card: -10
2011/01/20  5:54:33   8119 r02 Error activating card: -10
2011/01/20  5:54:40   8119 r02 Error activating card: -10
2011/01/20  5:54:41   8119 r02 card initializing error
2011/01/20  5:54:41   8115 s   Init for all local cards done !
2011/01/20  5:54:41   8115 s   anti cascading disabled
2011/01/20  5:54:41   8115 s   client(1) connect from 127.0.0.1 (pid=8124, pipfd=12)
2011/01/20  5:54:41   8124 c01 encrypted newcamd:34001-client 127.0.0.1 granted (proxyFan, au=viasat)
2011/01/20  5:54:41   8124 c01 user proxyFan authenticated successfully (using client 0000)
2011/01/20  5:54:41   8124 c01 AU wont be used on this port -> disable AU
2011/01/20  6:52:44   8124 c01 proxyFan (093E&000000/044C/88:9F2A): not found (1 ms)
2011/01/20  6:52:47   8124 c01 proxyFan (093E&000000/0F28/88:E7A5): not found (1 ms)
2011/01/20  7:18:21   8124 c01 proxyFan (093E&000000/0834/88:0459): not found (1 ms)
2011/01/20  7:18:24   8124 c01 proxyFan (093E&000000/0D66/88:6A9D): not found (0 ms)
2011/01/20  7:18:27   8124 c01 proxyFan (093E&000000/085C/88:B974): not found (1 ms)

oscam.conf

[global]
logfile = /var/log/oscam/oscam.log
nice = -1
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 9988776655443322111011121314
port = 00000@093e:000000

oscam.server

[reader]
Label = viasat
Protocol = mp35
Detect = cd
Device = /dev/ttyUSB1
mhz = 357
EMMCache = 1,1,2
Group = 1
CAID = 093e
BoxID = ********

oscam.user

[account]
user = proxyFan
pwd = ********
group = 1
uniq = 1
caid = 093e
ident = 093e:000000
AU = viasat
monlevel = 0

[preu]

Du kanske ska radera ditt boxid i din bifogade konfig.....

[Chruz]

har för mig att jag prövat det med samma fel, spelar det någon roll vilken version man använder av oscam bara den är kompatibel med pc:n?

[bpl]

Läs inlägg #50

[deas]

Prova med denna binära oscam filen och sätt som jag sa i min föregående post...

http://www.comhit.net/downloads.php?do=file&id=845