Download

1 Sunray -Flashup for 800hdse

http://www.sat-universe.com/showthread.php?t=210717

2
-- Because sometimes a patched image will not do the trick, i did chose for this
manual [FONT=Tahoma]the factory[/FONT] loaded image and the
correct SSL82 for this box

Here the All russian image

http://www.sat-universe.com/showpost...01&postcount=8

Here
the SSL82 For DM800SE

http://www.sat-universe.com/showthread.php?t=210589

1---
Connect [FONT=Tahoma]USB cable to[/FONT] service slot on
DM800SE/DM500HD and [FONT=Tahoma]USB slot[/FONT] on Pc. Windows
will then install [FONT=Tahoma]the driver[/FONT]

You
will notice, windows created a virtual Com Port connection to be be used ( in
this case Com Port 4)


2 --- Switch Receiver off and connect Network
cable Receiver and [FONT=Tahoma]Router

[/FONT]3 --- Then
Start SunRay- FlashUp, Tick Use Network, Fill the relevant boxes with local pc
IP and Romote ip of your choose and click Connect.

Program will ask for
you to Switch on the receiver.

4 -- It will then go into HTTP
mode

5 -- At this stage, you open your browser and insert the romote IP
shown on the 800LCD

Page will open as per bellow and then you chose the
option Update [FONT=Tahoma]Firmware[/FONT].

6 --- Click
Browse and navigate to your image

7 --- Chose the image and click
Open

8 --- Now click Flash button

9 --- Image will start to


10 --- When it finishes you can click the back button of your browser so
we can then send in the bl82 do not reboot

11 Browse and select the SSL82
for your DM800SE Clone

12 --- Once again Click Flash


13 --
After finishing click Reboot. In Most case you will need to do so
manually



Box will then reboot and come back to life with image we
chose to load. Then you can load your Patched image of your coice as box is
functional again


Ungefär sådär kan du prova göra. men använd vilken image som passar dig.