Oscam - Via 093e ... Card system not supported.... help ???

[Myrmidon]

Nytt försök, samma bekymmer.

Server

[reader]Label = Viasat
enable = 1
Protocol = internal
Device = 0
# Mhz = 500
# cardmhz = 500
Detect = CD
Group = 1
CAID = 093E
ident = 093E
BoxID = xxxxxx
EMMCache = 1,3,2

Conf

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 256
Saveinithistory = 1


[webif]
HttpPort = 8080
HttpUser = user
HttpPWD = pass
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 0
[dvbapi]
Enabled = 1
User = DVBApi
AU = 2

User

[account]User = DVBApi
AU = 1
Group = 1


ident        = 093E:000000
caid         = 093E


[account]
User = User1
Pwd = Pass1
AU = 1
Group = 1


ident        = 093E:000000
caid         = 093E

Log

------------------------------------------------------------------------------->> OSCam <<  cardserver started at Tue Feb 14 18:32:36 2012
-------------------------------------------------------------------------------
2012/02/14 18:32:36 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/14 18:32:36 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/14 18:32:36 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/14 18:32:36 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/14 18:32:36 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/14 18:32:36 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/14 18:32:36 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/14 18:32:36 2AAC7480 s signal handling initialized (type=sysv)
2012/02/14 18:32:36 2AAC7480 s 164 service-id's loaded in 2ms
2012/02/14 18:32:36 2AAC7480 s oscam.tiers loading failed
2012/02/14 18:32:36 2AAC7480 s 14 provid's loaded
2012/02/14 18:32:36 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/14 18:32:36 2AAC7480 s monitor: disabled
2012/02/14 18:32:36 2AAC7480 s camd33: disabled
2012/02/14 18:32:36 2AAC7480 s camd35: disabled
2012/02/14 18:32:36 2AAC7480 s cs378x: disabled
2012/02/14 18:32:36 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/14 18:32:36 2AAC7480 s CAID: 093E
2012/02/14 18:32:36 2AAC7480 s provid #0: 000000
2012/02/14 18:32:36 2AAC7480 s radegast: disabled
2012/02/14 18:32:36 2AAC7480 s http thread started
2012/02/14 18:32:36 2AAC7480 s creating thread for device /dev/sci0
2012/02/14 18:32:36 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/14 18:32:36 2AAC7480 s waiting for local card init
2012/02/14 18:32:36 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/14 18:32:36 2AF794B0 h HTTP Server listening on port 3001
2012/02/14 18:32:37 2AFF94B0 r viasat card detected
2012/02/14 18:32:38 2AFF94B0 r ERROR: 0 characters found in ATR


-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Tue Feb 14 18:32:38 2012
-------------------------------------------------------------------------------
2012/02/14 18:32:38 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/14 18:32:38 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/14 18:32:38 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/14 18:32:38 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/14 18:32:38 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/14 18:32:38 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/14 18:32:38 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/14 18:32:38 2AAC7480 s signal handling initialized (type=sysv)
2012/02/14 18:32:38 2AAC7480 s 164 service-id's loaded in 3ms
2012/02/14 18:32:38 2AAC7480 s oscam.tiers loading failed
2012/02/14 18:32:38 2AAC7480 s 14 provid's loaded
2012/02/14 18:32:38 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/14 18:32:38 2AAC7480 s monitor: disabled
2012/02/14 18:32:38 2AAC7480 s camd33: disabled
2012/02/14 18:32:38 2AAC7480 s camd35: disabled
2012/02/14 18:32:38 2AAC7480 s cs378x: disabled
2012/02/14 18:32:38 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/14 18:32:38 2AAC7480 s CAID: 093E
2012/02/14 18:32:38 2AAC7480 s provid #0: 000000
2012/02/14 18:32:38 2AAC7480 s radegast: disabled
2012/02/14 18:32:38 2AAC7480 s http thread started
2012/02/14 18:32:38 2AAC7480 s creating thread for device /dev/sci0
2012/02/14 18:32:38 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/14 18:32:38 2AAC7480 s waiting for local card init
2012/02/14 18:32:38 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/14 18:32:38 2AF794B0 h HTTP Server listening on port 3001
2012/02/14 18:32:38 2AFF94B0 r viasat card detected
2012/02/14 18:32:40 2AAC7480 s thread 2AAC7480 exit with signal 15
2012/02/14 18:32:40 2AAC7480 s cardserver down

Notera att i första försöket (gjordes iofs många med samma resultat, enbart klippt ut 2 sista ur loggen) så är det samma fel som tidigare.
I andra försöket dock stänger den igen cardserver.

Så, snälla ge mig lite hjärnceller för mina är totalt kassa...

[Kokkivoxx]

Är kortet ordentligt isatt? har du testat att ta ut och sätta in kortet när servern är igång? Hade problem med b.l.a ATR och cardsystem och löste detta genom att göra så!

Kolla så kortet får kontakt ordentligt. Innan fick du ATR att fungera tidigare, dock inte cardsystem. Jag skulle nog testa med liknande config som innan och se till att kolla hur det ser ut från att du drar ut kortet, tills det börjar läsas.

Alltså:

Card detected --> ATR --> cardsystem och se vad som händer. Jag har tyvärr inte använt mig av V****t, men jag rekommenderar guiden här på forumet. Annars finns det en Wiki på streamboard.gmc.to