Problem med mjukvara på CubeRevo 100 HD mini

[beson]

Försökte nu med killall newcs och sedan bara newcs för att starta den men nu får jag Reading Config file from /var/tuxbox/config/newcs.xml
Cannot open config file... quitting

kör jag hela commandot så hänger webIF i sending command och kör jag via command promt får jag
newcs start.jpg

Skriv rätt sökväg när du ska starta newcs
Den här alltså
/var/bin/newcs -C /var/keys/newcs.xml

I /var/tuxbox/config finns ingen newcs.xml

beson

[starbyte55]

detta får jag när jag kör start kommandot för newcs

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:01:03
Reading Config file from /var/keys/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console
logger config: level 1 type 3 output 1
Console log options: level 1 type 3
[ 00:07:04 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 00:07:04 ] [ Config ] Option <blockc0> for device 0 (Card no boxkey) not present, defaulting to NO
[ 00:07:04 ] [ Config ] Option <Seca-PPV> for device 0 (Card no boxkey) not present, defaulting to NO
[ 00:07:04 ] [ Config ] /dev/sci0 ECM priority: round
[ 00:07:04 ] [ Config ] Option <spider> not present for User: local, defaulting to NO
[ 00:07:04 ] [ Config ] Option <spider> not present for User: local_pip, defaulting to NO
[ 00:07:04 ] [ Config ] Option <spider> not present for User: local_rec, defaulting to NO
[ 00:07:04 ] [ httpd ] httpd-user: root, password: relook, accesslevel: admin
[ 00:07:04 ] [ EMM Cache ] Initialising dynamic Cache
[ 00:07:04 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2334
[ 00:07:04 ] [ Loader ] Starting Telnet on port 0
Can't create server: Address already in use
[ 00:07:04 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 00:07:04 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 00:07:04 ] [ Sci ] Opening device /dev/sci0
[ 00:07:04 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 00:07:04 ] [ Loader ] Reset failed ...
[ 00:07:04 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:07:04 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 00:07:04 ] [ NewCS ] Ready to GO!
Content-Type: text/xml
Cache-control: no-cache
Cache-control: no-store
Pragma: no-cache
Expires: 0

<?xml version="1.0" encoding="UTF-8"?>
<tree></tree>
newcamd: main loop
[ 00:07:04 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 00:07:04 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 00:07:04 ] [ Sci ] Opening device /dev/sci0
[ 00:07:04 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 00:07:04 ] [ Loader ] Reset failed ...
[ 00:07:04 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 00:07:04 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 00:07:04 ] [ Sci ] Opening device /dev/sci0
[ 00:07:04 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 00:07:04 ] [ Loader ] Reset failed ...
[ 00:07:05 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 00:07:05 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 00:07:05 ] [ Sci ] Opening device /dev/sci0

[starbyte55]

köre killall newcs och sen newcs kommandor igen

fick då detta...

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:01:03
Reading Config file from /var/keys/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console
logger config: level 1 type 3 output 1
Console log options: level 1 type 3
[ 00:33:15 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 00:33:15 ] [ Config ] Option <blockc0> for device 0 (Card no boxkey) not present, defaulting to NO
[ 00:33:15 ] [ Config ] Option <Seca-PPV> for device 0 (Card no boxkey) not present, defaulting to NO
[ 00:33:15 ] [ Config ] /dev/sci0 ECM priority: round
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local, defaulting to NO
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local_pip, defaulting to NO
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local_rec, defaulting to NO
[ 00:33:15 ] [ httpd ] httpd-user: root, password: relook, accesslevel: admin
[ 00:33:15 ] [ EMM Cache ] Initialising dynamic Cache
[ 00:33:15 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2362
[ 00:33:15 ] [ Loader ] Starting Telnet on port 0
[ 00:33:15 ] [ Loader ] Started HTTP-server on port: 9000
[ 00:33:15 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 00:33:15 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 00:33:15 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 00:33:15 ] [ Sci ] resetting card now
[ 00:33:15 ] [ Sci ] Reset
[ 00:33:16 ] [ Sci ] Card reset
[ 00:33:18 ] [ ATR ] T=0 1etu=372.00us Guardtime:12etu WWT:9600etu
[ 00:33:18 ] [ ATR ] Historical bytes: 0 B 0 0
[ 00:33:18 ] [ Loader ] Init Conax card
[ 00:33:18 ] [ KeymaN ] Adding key 00000043cfdd3e type 0 on Provider 000000 for caid 0B00 ID=0
[ 00:33:18 ] [ KeymaN ] Adding key 0000000021e7ee type 1 on Provider 000000 for caid 0B00 ID=0
[ 00:33:18 ] [ Loader ] Card 0B00 on port /dev/sci0 ready
[ 00:33:18 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:33:18 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 00:33:18 ] [ NewCS ] Ready to GO!
Content-Type: text/xml
Cache-control: no-cache
Cache-control: no-store
Pragma: no-cache
Expires: 0

<?xml version="1.0" encoding="UTF-8"?>
<tree></tree>
newcamd: main loop
[ 00:33:22 ] [ Newcamd:10000 ] User local logged in, client: Mgcamd
[ 00:33:23 ] [ Newcamd:10000 ] User local logged in, client:

[starbyte55]

köre killall newcs och sen newcs kommandor igen

fick då detta...

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:01:03
Reading Config file from /var/keys/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console
logger config: level 1 type 3 output 1
Console log options: level 1 type 3
[ 00:33:15 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 00:33:15 ] [ Config ] Option <blockc0> for device 0 (Card no boxkey) not present, defaulting to NO
[ 00:33:15 ] [ Config ] Option <Seca-PPV> for device 0 (Card no boxkey) not present, defaulting to NO
[ 00:33:15 ] [ Config ] /dev/sci0 ECM priority: round
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local, defaulting to NO
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local_pip, defaulting to NO
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local_rec, defaulting to NO
[ 00:33:15 ] [ httpd ] httpd-user: root, password: relook, accesslevel: admin
[ 00:33:15 ] [ EMM Cache ] Initialising dynamic Cache
[ 00:33:15 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2362
[ 00:33:15 ] [ Loader ] Starting Telnet on port 0
[ 00:33:15 ] [ Loader ] Started HTTP-server on port: 9000
[ 00:33:15 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 00:33:15 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 00:33:15 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 00:33:15 ] [ Sci ] resetting card now
[ 00:33:15 ] [ Sci ] Reset
[ 00:33:16 ] [ Sci ] Card reset
[ 00:33:18 ] [ ATR ] T=0 1etu=372.00us Guardtime:12etu WWT:9600etu
[ 00:33:18 ] [ ATR ] Historical bytes: 0 B 0 0
[ 00:33:18 ] [ Loader ] Init Conax card
[ 00:33:18 ] [ KeymaN ] Adding key 00000043cfdd3e type 0 on Provider 000000 for caid 0B00 ID=0
[ 00:33:18 ] [ KeymaN ] Adding key 0000000021e7ee type 1 on Provider 000000 for caid 0B00 ID=0
[ 00:33:18 ] [ Loader ] Card 0B00 on port /dev/sci0 ready
[ 00:33:18 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:33:18 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 00:33:18 ] [ NewCS ] Ready to GO!
Content-Type: text/xml
Cache-control: no-cache
Cache-control: no-store
Pragma: no-cache
Expires: 0

<?xml version="1.0" encoding="UTF-8"?>
<tree></tree>
newcamd: main loop
[ 00:33:22 ] [ Newcamd:10000 ] User local logged in, client: Mgcamd
[ 00:33:23 ] [ Newcamd:10000 ] User local logged in, client:

[atomized]

köre killall newcs och sen newcs kommandor igen

fick då detta...

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:01:03
Reading Config file from /var/keys/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console
logger config: level 1 type 3 output 1
Console log options: level 1 type 3
[ 00:33:15 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 00:33:15 ] [ Config ] Option <blockc0> for device 0 (Card no boxkey) not present, defaulting to NO
[ 00:33:15 ] [ Config ] Option <Seca-PPV> for device 0 (Card no boxkey) not present, defaulting to NO
[ 00:33:15 ] [ Config ] /dev/sci0 ECM priority: round
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local, defaulting to NO
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local_pip, defaulting to NO
[ 00:33:15 ] [ Config ] Option <spider> not present for User: local_rec, defaulting to NO
[ 00:33:15 ] [ httpd ] httpd-user: root, password: relook, accesslevel: admin
[ 00:33:15 ] [ EMM Cache ] Initialising dynamic Cache
[ 00:33:15 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2362
[ 00:33:15 ] [ Loader ] Starting Telnet on port 0
[ 00:33:15 ] [ Loader ] Started HTTP-server on port: 9000
[ 00:33:15 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 00:33:15 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 00:33:15 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 00:33:15 ] [ Sci ] resetting card now
[ 00:33:15 ] [ Sci ] Reset
[ 00:33:16 ] [ Sci ] Card reset
[ 00:33:18 ] [ ATR ] T=0 1etu=372.00us Guardtime:12etu WWT:9600etu
[ 00:33:18 ] [ ATR ] Historical bytes: 0 B 0 0
[ 00:33:18 ] [ Loader ] Init Conax card
[ 00:33:18 ] [ KeymaN ] Adding key 00000043cfdd3e type 0 on Provider 000000 for caid 0B00 ID=0
[ 00:33:18 ] [ KeymaN ] Adding key 0000000021e7ee type 1 on Provider 000000 for caid 0B00 ID=0
[ 00:33:18 ] [ Loader ] Card 0B00 on port /dev/sci0 ready
[ 00:33:18 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:33:18 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 00:33:18 ] [ NewCS ] Ready to GO!
Content-Type: text/xml
Cache-control: no-cache
Cache-control: no-store
Pragma: no-cache
Expires: 0

<?xml version="1.0" encoding="UTF-8"?>
<tree></tree>
newcamd: main loop
[ 00:33:22 ] [ Newcamd:10000 ] User local logged in, client: Mgcamd
[ 00:33:23 ] [ Newcamd:10000 ] User local logged in, client:

Hej,
Har inte haft tid att sitta vid datorn ikväll...
När du fick de här loggarna var du oerhört nära. Allt ser rätt ut och mgcamd loggar in på servern som du kan se längst ner. :-)

Du borde haft bild i det läget. Om du nu ändå inte hade det så kan det bero på B: parametern i mg_cfg. Jag läste några inlägg på nätet som sa att det var B: { 11 } som gällde för CubeRevo. Du kan ju prova att ändra till 11 får vi se.

[beson]

Den här mg_cfg är saxad från denktenk, ur tråden som atomized länkade till.

A: { 01 }
B: { 12 }
C: { 01 }
D: { 15 }
E: { 15 }
F: { 00 }
G: { 33 }
H: { 06 }
K: { 03 }
L: { 02 } 192.168.1.1 514 /tmp/mgcamd.log
M: { 00 }
N: { 07 } 5 30
O: { 00 } username password
P: { 00 }
Q: { 30 }
R: { 02 }
S: { 00 } 80
T: { 00 }
U: { 00 }

Och här är iaf B: { 12 }
Men testa med B: { 11 } först.

Edit: Kolla av dom andra värdena också i din mg_cfg mot den här configen.

beson

[beson]

Om du kört E2 på flash, så måste du nog flasha en ny bootloader innan du använder DGS baserade images.

[h=Most Enigma’s on DGS boxes use a different bootloader from the standard DGS bootloader.]4[/h] So if you want to go back to a DGS based image after using one of these Enigma’s, you have to flash the standard DGS (PAL or NTSC) bootloader (uboot.img) first and than flash the other images (all_noboot, kernel_root, db, welcome), or flash an all image.

Vilket image hade du när det funkade?
Eller har det aldrig funkat?

beson