Ursprungligen postat av
swepart
Ja en vanlig MB6a,, den gamla, inte plusversionen
Då den MB egenltligen är en Fortis mottagare, så även Octagon mfl så hittade jag instruktioner för hur man fixar en octagon.
Dessa instruktioner följde jag och sedan dess har jag kört Enigma2 Nebula V3 på min gamla MB 6a
Nedan är ett urklipp för hur man uppdaterar bootloadern i MB6an
1. connect your SF918SE+ with your PC by null modem cable
2. run PKT & B4T Loader changer for SF1008+
3. choose COM Port
4. switch OFF 918SE+ by disconnect power cable on the back of the receiver
5. press Connect button
6. switch ON 1008+ by connect power cable on the back of the receiver
7. wait until Loader button change status to active
8. if succeed unpack pktloader.zip and copy pktloader62 on your USB stick in FAT partition
9. put USB stick in your SF918SE+ USB slot
10. run ‘Load PKTLoader 6.2’ option if your original loader version is >= 6.2
11. During the operation LED on the front of the receiver should blink
12. After success operation have fun with new loader script ; )
Now You can running E2 from USB stick or running original software if You remove USB stick with installed E2 Image