Tjena
Försöker flasha in openpli med usb i fronten på boxen men den vill inte ta den.
När boxen startar står det att det finns en uppdatering, men den startar inte upp och flashar, trots att jag har följt anvisningarna på: http://openpli.org/docs/topic/instal...uuno-or-vuduo/

[h=How to flash from an USB stick]3[/h]
  1. Format your USB stick with a FAT32 file system
  2. Download the USB image of your choice (this is an image specific for USB flashing, you can not use the standard .nfi file)
  3. Extract the USB image (Zip-file) with full path to the root of the USB stick
  4. Switch your VU+ receiver off (power-off, not stand-by)
  5. Insert the prepared USB stick into the front of the receiver and switch the power on
  6. Follow the installation instructions on the screen
Note: when asked by the installer to press a specific button to start the installation, this means the button on the receiver, not the remote control.
Vad gör jag för fel?