Jag har en Vu+ Uno som jag inte kan lägga in en ny mjukvara. Det är openvix-Apollo,008-vuuno_usb.zip. Vad / Hur skall jag göra ? Har någon samma problem? Tacksam om någon vet!
Jag har en Vu+ Uno som jag inte kan lägga in en ny mjukvara. Det är openvix-Apollo,008-vuuno_usb.zip. Vad / Hur skall jag göra ? Har någon samma problem? Tacksam om någon vet!
Vad händer när du försöker?
Hur har du gjort?
Har du frågor om hur man gör, ställ dem i forumet! Skicka inte PM till mig!
Använd SÖK i forumet. LÄS Guider och Wikis. Testa!!
How to flash a VU+ Uno using a USB stick
Quick guide how to flash a VU+ Uno receiver with a USB stick. Tools required are just your favourite image and at least a 128mb memory stick formatted FAT32.
1. Format you memory stick on you PC FAT32.
2. Create a directory in called vuplus.
3. Within the the vuplus directory create another folder called uno.
4. Unzip the USB upgrade files (4) into that directory.
The 4 files are :
boot_cfe_auto.jffs2
kernel_cfe_auto.bin
root_cfe_auto.jffs2
splash_cfe_auto.bin
5. Power off your VU+ Uno.
6. Insert memory stick into front USB slot.
7. Power on your VU+ Uno and follow the on screen instructions.
On Screen Instructions will include press ch- on the Uno [not remote] to initiate flash
This must be done within 10 seconds as i have found or it will boot box as normal
once done it will advise you to remove USB Stick and reboot
Thats it your done.
Raspberry Pi /Smargo+ reader
Oscam server
MOVISTAR+ Premium Extra
Canal Digital Familjepaketet
Vu+ Duo2 och Vu+ Solo2
Toroidal 90-30W-1W-13E-16E-19,2E-23,5E-28,5E[/h]