Hittade det här på en sida. Nån som vet om det fungerar?

Instructions to reset your box using MMEdit 3.11 or later:
Connect PC to receiver through a null-modem cable.
Power on receiver.
Open MMEdit.
Go to "Terminal" page and click "System" menu and choose 'Hardware Reset'.
Receiver's display will show PULL.
Pull out the mains plug and reinsert.
If the above procedure fail try next method

Instructions to manualy reset your box:
pull out the mains plug
press ON/OFF button and keep pressed, and simultaneously reinsert the mains plug.
when display shows four horizontal lines - - - - release ON/OFF button and immediately press up button ^ and keep pressed, and simultaneously press down button v
display will show CUSt for a short moment and then PULL tHe Cord in a running text sequence. Pull out the mains plug and reinsert.
Note:
in #3 - if you do the above sequence the other way round, i.e. first the down button v and then the up button ^ the nokia will show Fact and it will load several default channels in memory from Astra and Sirius
in #4 - Inscription PULL tHe Cord not to appear, we do not know why but sometimes it happened, but if you pull out mains plug after CUts (after 1-2s) - Nokia Resets!